Update:

Just a quick update guys. I will be getting married tomorrow (finally), so I Wont be around for a while. I get a lot of PM and email from you guys, and I dont want you to think you are being ignored :) COntinue to send it, I just wont be able to answer for a few days. I just went through and got caught up on all the threads finally...

In other news, I picked up a truckload of parts from SBR yesterday. I will probably set aside this thursday to replace my tranny input shaft seal, build up the new motor, asmemble everything and get the car running. Friday I should have it roughly tuned, and should have some new airflow data as well as other information. I'll be sure to post the results, and perhaps a short video of the new antilag setup included in DSMlink Version 2. :biggrin:

Congratulations Kevin!!! have fun on the honey moon!!!

Hey Kevin, congratulations!!!

Congrats, but are you sure your wife will put up with all the time and money into the car? :nono: :biggrin:

Hey man, glad to see you found a good girl. Congratulations!! Enjoy yourself!

congrads bro

you can do it!!alllll.....nightttt....LOOOONG.... :lol: congrats homie!

Whenever you get back, you should either put here, or in a 'before new block update' thead, your current turbo :) just to clarify it to me.

I know you have an "M14", so that's like a 7cm 20g turbine housing and the biggest compressor found on GT30's, and that is 56 trim, or 60?

I'm confused.. Why did you choose not to go with the 60-1 compressor? Or was it that you wanted a better turbine than the 2.16'' / 2.36'' on the standard GT14?

hey man congrats, have fun and if you need some 1 to look after the car ill be more then glad to help
hehe
have fun
congratsz again
1

Damm kevin.. if u had told me earlier.. i would have presented u with a dozen bottle of prosolution pills or alzera pills... u know.. it might be very helpfull to u :D ... and we guys dont want to see ur antilag set up video... caz these guys are bored seeing car videos all these days... instead why dont u post ur honey moon video :D... i heard guys syaing (not me) that they have seen ur cars performance.. now they want to see ur performance lol... i'm innocent :) jus messing :P anyway congrats :D

your car is a lucky girl! [j/k]... Congrats!!! it's a huge step [even though it scares the hell out of me at this point in my life!!] i hope everyone realizes that his time dedicated to the learning of all us other dsmers is now comming to a screeching halt, so try to do some of your own research [notice how Kevin dropped all those sites then runs off and gets married? ;)]... i can see it now: " 'hang on honey, i gotta correct this newbie about the differences on turbos again' 'but my feet hurt' 'but...' 'i said MY FEET HURT!!!' '[thought: i guess you guy's come after the feet now!!!]' " ;)

but really... isn't life great? and yours just got even better... Congrats again...

congratulations man

Yea congratulations Kevin. Hopefully ya'll will be having a sick honeymoon. I guess this means I gotta start doing my own research. Aight have fun. PEACE!

Congradulations Kevin.:thumbsup: sounds like your having one hell of a week, getting married and rebuilding your car. but which one will you enjoy more???? once again congrats, have fun with the new wife.;)

ey kevin their givin free condoms in kazaa but i dont think ur gonna be needin em but just incase check em out.


ey it feels pretty goo to finnaly help u instead of u helpin us :icon16:

Yo DSM genious! Congrats! and some advice: treat ur girl like ur car and ull be set for life :-D. just a suggestion haha

Congrats man!

Lol, some good replys guys. :D The wedding went well. It was done in true POSr style, quick and simple. I had a hard time not thinking about the car the whole time, believe me. Closing on the mortgage on the new place wednesday is taking up some brain space as well. But its all good once I fire the POS up again ;) The wife came after the car, so she has never known life without it. Shes already used to my BS, and has already granted "permission" to put it back together this week, lol.

Thanks for all the replies guys. :)

Whenever you get back, you should either put here, or in a 'before new block update' thead, your current turbo :) just to clarify it to me.

I know you have an "M14", so that's like a 7cm 20g turbine housing and the biggest compressor found on GT30's, and that is 56 trim, or 60?

I'm confused.. Why did you choose not to go with the 60-1 compressor? Or was it that you wanted a better turbine than the 2.16'' / 2.36'' on the standard GT14?

Cant pass up a chance to talk turbos, of course ;) So the complete breakdown of my turbo is as follows. Regular mitsu 7cm turbine housing. TDO6H turbine wheel. GT30/40 "hybrid" compressor wheel (56 trim, also used in the GT35R by the way). The same compressor cover used in the "M" series SBR turbos, and the FP red/green. Its a modified TDO6 cover, I believe sometimes called the "cyclone" cover.

So this turbo was actually a "M50" at one point. A TDO6 50 trim with the same housings. Mike and I wanted to upgrade it, and use something besides the typical 60-1. A great wheel, but so many people run it, includind my friend Chad (on the POSr site). No need for us to run the same wheels. So we decided to put the "GT14" wheel in there, and go to the larger H turbine wheel to let it breathe. Mitsu is known for very good turbine wheels for thier size and spool. The TDO6H and 7cm combo has run 9s for reference (red).

It seems like a great combo, but since I havent been able to get boost over 25 psi I cant prove it one way or the other. Which is why I am not upgrading the turbo again until I get a fair and square dyno run for the turbo. That means over 30 psi and an aftermarket intake manifold. I may or may not still have this turbo when the track opens, but if I do, the antilag addition to DSMlink will help me get a decent ET with it. But I am not specificly holding out for the track. I have another idea I would like to try and the turbo will be getting sold (with a fresh rebuild), probably with the manifold, dumptube, and O2 housing. Starting new from the ground up for the turbo. ;) If I dyno over my goals (in about a month), the turbo will go for sale right away. I havent mentioned this anywhere else, so I guess you guys have the inside line if anyone wants it. :D I dont discuss my plans much on the other boards these days for some reason...

answer me kevin... we all know ur car performance... prove us ur performace with ur honeymoon video :D let me guess ur honey moon should have taken place in ur car.. garage or in new england race track :) am i rite???? was it a long tactical street race or a short powerfull 1/4 mile race ??? i'm innocent :)

No comment ;)

Whats wrong, only make it an 1/8 mile and then the motor popped???

j/p

Nice to see another married guy, now the priorties are as follows. food, car, sports, wife.:)

Congradulations Kevin.

Congrats man

I'll be on the west coast for a week, I wont have internet. ;)

calif?

Does that mean that i'm the new moderator fot this eclipse forum :D then i am goona change the whole thing to a sex forum... i'm innocent :)

wooooo hooooooooo hoooooooo i vote for 95eclipse-gsx!!!



their better be clips too ese... ::shakes fist:: :biggrin:

lol i thought we can have a bachelors party since our new family man (Kevin) is out for a week :D

lol i thought we can have a bachelors party since our new family man (Kevin) is out for a week :D

SLAP SLAP SLAP WHOOO WHOOO !!! I'M INNOCENT :)

lol i thought we can have a bachelors party since our new family man (Kevin) is out for a week :D

SLAP SLAP SLAP WHOOO WHOOO !!! I'M INNOCENT :)

damn straight! hoes:boink:,chicken wings,dancing:bananasmi,beer:cheers:,music:ylsuper : and more hoes! did i mention beer?

LOL hell yes... i will second that, hard liquer is good to!! maybe a blunt? :smokin:

:werd:

:iagree: 'nuff said.

ur back ducky!!

ur back ducky!!

I went on a personal vacation and was goin' wild.
Also check out my new video called "Ducky Gone Wild." It's full of me and scantily clad co-eds willing to bear it all for the camera(me).:evillol:

lmao

oh yea well i broked my left wrist :) not as much as fun as you had but ok

see what happens when you play with yourself!!! :icon16:

i couldnt control myself...

so ahh... Kevin, now that you're married, does this that not only do we get great advice on dsm s, but you'll also dole out relasionship advice?

his on the westcoast like he said...


"no internet"

he came out here on his honeymoon and got a hotel right next to RRE!!! j/k he probly in San Diego or something... ;)

I was in portland, OR. Equipment training for work. More like a weeks paid vacation with 50 bucks a day for food and beer, new car, and hotel room. BAck now though. Unfortunately my head has not arrived, so the car is still collecting dust.

Its good to have you back. Did you just have your head rebuilt or did you have some/more porting and pollishing???

I did the porting. Mild porting really. Polished exhaust side and combustion chamber. I sent it out for the valve job, 1mm over, guide replacement, and resurface.

welcome back!!!:) i had ur back while u were gone i tried to keep this guys under control but they didnt listen to me:(

95eclipse-gsx bitch slaps chavez408 :D