paint drying time
Pharma_Joe
01-11-2004, 06:12 PM
Hey I was just painting the undercarraige of my R34 skyline and was holding it with my hands. I have already sprayed a few coats of TS-50 blue over a coat of primer, the last coat dried for about 4 hrs before I decided to paint the wheel tubs black. Unfortunately I now have a fingerprint on the blue where I was holding it, probably from my sweaty fingers. Also the masking tape has left all scuff marks when I took it off.
Anyhow here are my questions: Should I be waiting for how long to paint after the last blue coat? And should I not be using Tamiya masking tape over the blue coat at all? If so how do I go about it?
Any help would be great :-)
Anyhow here are my questions: Should I be waiting for how long to paint after the last blue coat? And should I not be using Tamiya masking tape over the blue coat at all? If so how do I go about it?
Any help would be great :-)
swollen
01-11-2004, 06:16 PM
I usually let me bodies dry a minimial of 1 week in a warm room before I touch them.
By the time I'm doing final assembly its about a month, or more depending on how quickly I worked on it.
Mike.
By the time I'm doing final assembly its about a month, or more depending on how quickly I worked on it.
Mike.
Pharma_Joe
01-12-2004, 02:31 AM
Am I not waiting long enough for the paint to dry to apply masking tape, which is causing the scuffing appearance?
chrismcgee
01-12-2004, 03:54 AM
i think you are definately not leaving the car long enough. i would leave it over night before applying any pressure or tape to the paint. although its dry its still not 100% set hard.
sand down the finger print marks with 2000 grit paper and re spray the area affected. then leave to dry for over 24 hrs
sand down the finger print marks with 2000 grit paper and re spray the area affected. then leave to dry for over 24 hrs
David_
01-12-2004, 05:38 AM
i left my car for about 2 days... then i started detailing it... just touch it, and if it doensn't rub off, touch it harder (on a spot thats inconspicuos, eg: taillight area (since u glue over that anyway))
Automotive Network, Inc., Copyright ©2025