push button switch does nothing no lights

I have 1988 broncoII. My push button switch has extremly low light and switch does nothing.Went to pick apart change switch and 4x4 control module.still nothing. Switch does nothing. Check power to control module
there is power there.No fuses are blown.the light is so dimm you can hardly see it.any help please

I have 1988 broncoII. My push button switch has extremly low light and switch does nothing.Went to pick apart change switch and 4x4 control module.still nothing. Switch does nothing. Check power to control module
there is power there.No fuses are blown.the light is so dimm you can hardly see it.any help please


With the key on engine off, can you hear something clicking when you push the button

thanks for answering. No there is no clicking.Imgetting like 3 volts at the switch red/yellow wire on switch

thanks for answering. No there is no clicking.Imgetting like 3 volts at the switch red/yellow wire on switch


let me do some research... in the meantime just try this for shits and giggles. Have a buddy sit in the drivers seat and just push the button repeatadly. While he does this get under it and tap on the little eletric motor on the back of the transfer case. and see what happens.

Andy.

can anyone tell me how this conversation ends cause im having the same problem now thankyou in advance


it ended 1/7/04, its now 7/21/05

you should look for a bad wire connection on the passenger side kick panel.My 90 bronco had the same problem.there will be a plastic connectio with two wire feed into it.I have a fullsize but I bet it is still the same setup.I got a switch off a bronco2 for mine but found the wire problem fixed it.

locate the reset button on the pass side kick panel has two wires on each side