240sx soch turbo

I'm busy turbo charging my '90 240sx SOCH automatic
I got a t04 turbo with a .82 A/R housing and I'm planning on keeping the boost at 6psi. I'm expecting about 215 rwhp, and high 13's to flat 14's down the 1/4 mile.
Anyone been there already?? pointers welcome!!!

Thanks and happy new year

First pointer......get a manual really....seriously.

you don't think that the automatic will hold 6psi?
It seems pretty strong!!

it will hold

i needed a new clutch on my car

has anyone done the turbo ka24e thing??
I need oil feed lines. who can manufature or sell me set.
Thanks

it will hold

... For how long?

has anyone done the turbo ka24e thing??
I need oil feed lines. who can manufature or sell me set.
Thanks

You can buy some at autozone... All they are is a teflon inner section wrapped in stainless steel. You won't need anything bigger than a -4 AN which is a quarter of an inch. Then just buy the fittings to fit onto the end of the line and then buy fittings to hook it up to the turbo and to the oil pickup.

oh yeah... dont be surprised if your auto tranny burts to pieces at anything above 10 psi. The auto tranny on the 240 is very weak and can't handle much power.

at 10psi, you're already pushing some good times...

I think even at 6psi I should be able to pull some high 13's, especially if I open up the exhaust.
What do you think??

I don't think she'll hold 10psi with stock internals??

I think even at 6psi I should be able to pull some high 13's, especially if I open up the exhaust.
What do you think??


Single cam, auto wit 6 psi? High 14s. If nothing breaks.

Single cam, auto wit 6 psi? High 14s. If nothing breaks.

And if it were dual cams?

And if it were dual cams?

8's

uhhhhh wtf?... 6psi on dohc = 8's????

http://www.ka-t.org/forums/viewtopic.php?t=16
http://www.ka-t.org/performance.html

uhhhhh wtf?... 6psi on dohc = 8's????

http://www.ka-t.org/forums/viewtopic.php?t=16
http://www.ka-t.org/performance.html



actually, i would say high 7s.

Not to be rude or all, but a friend of mine had his 240 transmition rebuilt to handle the boost (7 psi). I was informed that the stock KA tran is strong but it is not a safe idea to run it stock with boost…. I just thought I might share this with you … :icon16:

Good luck!
:)

Single cam, auto wit 6 psi? High 14s. If nothing breaks.
at 6psi on a t04 I should have at least 200whp, which should put me at about low to flat 14's.

Not to be rude or all, but a friend of mine had his 240 transmition rebuilt to handle the boost (7 psi). I was informed that the stock KA tran is strong but it is not a safe idea to run it stock with boost…. I just thought I might share this with you … :icon16:

Good luck!
:)
Thanks! not planning on running anything more than 6psi!!!!

actually, i would say high 7s.
Well I don't know but 7's but I'll be happy with low 14's or better!!

uhhhhh wtf?... 6psi on dohc = 8's????


yup

actually, i would say high 7s.

well, at least 1 person can sense sarcasm. :)

lol ohhhhhh.... yeah guess thats what forum exposure does to you...