Help Push button 4 wheel drive not engaging.

Ok here's the deal. My four wheel drive just went out, and so in checking, I find that the vacuum hose that engages it is not attached to anything on one side. So I know what the problem is, but I don't know where the hose attaches to, and I can't find it. The hose comes from the switch out about a foot and then T's the left side is hooked and runs somewhere toward the engine, however the right side is unhooked and runs down towards the radiator. Any ideas on where I can find my missing hose to attach this end to. We just had a huge snowstorm and I desperately need my 4-wheel drive back!!!

I think your loose hose goes to the actuator convieniently located under the battery box. See post 183 for a wealth of vacuum connection info.

I think your loose hose goes to the actuator convieniently located under the battery box. See post 183 for a wealth of vacuum connection info.

Thanks a ton, I had already found that out, and fixed the problem, but I really appreciate your response. That was exactly what the problem was, easy fix!

where can i find it?

Where is post 183, I would like to see this for educational purposes.