chrysler keyless remote

can anyone out there please tell me how to program remote for 94 LHS, replaced batteries on this one and it quit working , dealership wants $35.oo to program it , rip offf!!!

This works from 1994's. I have no idea if it is the same for the other years.

1) Remove the middle ven bezel.
2) Disconnect the traction control connector.
3) Have ignition on the "ON" position (don't start the car.)
4) Ground pin 4 to pin 1.
5) The locks will cycle, this is the time to push any button on the transmitter.
6) The locks will cycle again showing that the transmitter has been programmed.
7) Unground the pins.
8) Reconnect the traction control connector.
9) Replace the bezel.

thanks that worked , only hard part was getting the bezel off