94 camaro, 3.4 head bolt torque
zbo2
12-20-2003, 04:31 PM
hey guys........
i have to replace the head gaskets on my sons 94 camaro convert., i'm having trouble getting the head bolt torque's, i'm pretty sure it has the stretch type bolts. i've seen a couple of differant torque settings and don't know which ones are correct, also i have been told two differant ways to do the valve lash, one was the old fashioned way of taking the slack out of the push rods and going 3/4 of a turn,with the valves in the correct position of course, and the other was torquing the valves to 18 ft lbs? it has an " S " motor......
thanks in advance........i'm sure somebody out there has the right motors manual....
Joe
i have to replace the head gaskets on my sons 94 camaro convert., i'm having trouble getting the head bolt torque's, i'm pretty sure it has the stretch type bolts. i've seen a couple of differant torque settings and don't know which ones are correct, also i have been told two differant ways to do the valve lash, one was the old fashioned way of taking the slack out of the push rods and going 3/4 of a turn,with the valves in the correct position of course, and the other was torquing the valves to 18 ft lbs? it has an " S " motor......
thanks in advance........i'm sure somebody out there has the right motors manual....
Joe
Chevyracincamaro
12-20-2003, 05:39 PM
41 ft/lbs and then 90 degree (1/4 turn) on each...the numbers i have for the head bolts
Automotive Network, Inc., Copyright ©2026