92 RS parting out or sell whole.

Ok fellas, I have to many of these and one has been neglegted for quite some time. It's a mostly teal (see my signature pic), with a primer grey driver door, a black hood, and some others. The body is straight and clean with only some very minor serface rust. Power locks, windows, and rear hatch. The hatch motor is brand new. The interior other than the dash pad is in very good shape. Seats aren't torn or discolored. Ok, here is a list of parts if your interested. Two powered doors, front and back seats, stearing wheel with air bag, rear hatch with defrost, hood, 3.1 engine that ran perfect before pulled, 700R4(very strong, recently rebuilt), driveshaft, torque arm, 4 15-8 inch wheels with fairly new tires, AC condensor, AC compressor, radiator...hell I'll put it this way. I have a complete car here, if you need or want a part, let me know I probably have it. Make me a resonable offer and it's yours. :rofl:

send a pic of the rims [email protected]

your gonna have to give me a day on that, my ol'lady's friend has the camera.

Where the fuck were you guys when I was in America looking for a Maro????

I move over here and now you guys are selling all kinds of wheels....

Man I wish I was back there I'd have a sweet ass ride again...

1992RS hey bro you know how to rebuild tranny? 700R4?
Trannys was the one thing I never learned... maybe hook a brother up with a step by step

ok, I want the passenger door, the rear bumper cover, and the ground effects that are under the passenger door.

Well Vlad, here is the step by step instructions on rebuilding a trany. Jump in your car and drive to Maaco. :iceslolan I never learned auto tranys. Manuals arent' all that bad.

Genopsyde: you seriouse?

if the price is right, i'm very serious.

Make me an offer.

some drunk lady rear-ended my car while it was parked and cracked the bumper cover in 3 places, my former room mate backed into my passenger door leaving a rather deep and large dent that cannot be pounded out, and i caught that ground effect on a railroad tie that was along the side of some chick's driveway.

$200 plus shipping

Damn, that poor car.

my front nose has a crack too, but the bra covers it

How about $250?

it'll be $250 after the shipping charges

You don't want my front nose, It's in pretty bad shape.

Yeah ok, that works. $250. I should have them off by lunch time tomorrow.

$200+shipping I can buy now, any more will hafta wait till 2 fridays from now, which I have no problem with, and will give you time to get shipping prices and all that other shitty shit.

ok, just lemmie know about all the costs and all that

I see we're both active right at this moment, do you use any instant messengers???

ooh, you know what else, my clear plastic cover that's over my gauge cluster is all shitty, i tried to clean it and it won't come off, how does yours look?

Yeah I have AIM. brandonslespaul
I'll do 200+shipping. I'll give you a exact shipping on monday. I'll throw in that plastic cover for nothing if I can get it out in one piece.

it's easy to remove, i removed mine to clean both sides, but whatever is fogging it must be inside it.

Oh, I also have a hydraulic cam, non roller ask for specs, a set of hydraulic lifters, roller rockers, 15 our of 16( you can get the other one for a few bucks), and a performer EPS intake. I'm asking 40 for the cam, 40 for the lifters, 50 for the rockers, and 90 for the intake. All are brand new never installed still in the box.

any takers???

I still have parts. and I forgot to mention my flowmaster 80 series muffler. Only used for about a month before I redid my exhaust.

how much for your radator ,the little connector on my broke off for the hose on the left
i personaly dont have much money cause im 16 but how much would you want for yours if you still have it
i would make an offer but i really have no clue what they go for

$20 bucks and that's including shipping.

C'mon yall, I have to get rid of this car by the 26th. I still have a lot of parts to get rid of. And I'm selling dirt cheap.

You know anyone with a FPO or APO out here *eg*

Where are you Vlad?

you get your camera back yet? lemme know

Sheeesh talk about short term memory...Australia

ah..that's right. So how do you like it down under?
And no, I wasn't able to get my camera yet. But they are in good shape, nice round and balanced. They need to be cleaned though. I ran the car untill the brakes where completly gone, so there is a lot of brake dust on the front ones.

Bro
Its great here other than the fact 5.7L and 350 are worth a fortune here...
If I couldn't live in the USA then I'd pick here...man I love it

Are you american or austrailian?

the intake, will it work on a 91 5-speed L03 tbi?

also what condition are the t-tops? they are see-thru tint right? I might be interested for the right price..

The car that I'm parting out doesn't have T-tops. Sorry. And the intake won't work for your car either. You basicly have the same car as I. We have the vortec style cylinder heads. That's why I'm selling the intake, I can't use it. Unless you have a set of pre 87 heads. sorry again.

my dad has offered $30 for the rear deck lid, minus the glass.

And how the hell am I gonna get the glass off of it?

a hammer??? j/k, I don't know, i've just seen decklids minus the glass on ebay before, and they gotta attach the glass to is somehow...

1992RS

man o man bro... do you really think that they would let me in the US Navy Submarine force if I was Aussie?
But then I never really made it clear huh..
I'm born, bred, raised American....

If you start taking of the seal for the glass it should just pop right out.

how's the grille look?

Ahh. ok. So you had a port visit there and didn't want to come back huh?? LOL Ok, I'll try to take the glass off of it.
About the grill, it's a mess. When I bought the car it needed a whole new front end. sorry. What I do have..a drivers side power door, both front quarter panels, front and back seats, center consol cover, steering wheel, wheels with near new tires, driveshaft, torque arm, 700r4 tranny, 3.1 L engine, tranny cooler, radiator, A/C compressor, altanator, power stearing pump, stearing box, and suspension parts.

Nope never came here as a port.... Meet my wife in the States..