Ideas needed for building up a 2g rs engine

Just needed a few Ideas on how to build up my 2.0 for boost. I'm sick of replacing stock parts over and over, time for bigger and better. I have blown my head gasket and clutch.
I know the RS model is not exactly a speed machine, but this is going to be my project car this winter. I also think it would be a great sleeper with its stock rs trim.

i think EclipseRST would be the guy to ask as hes turboed his car

cool, thanx

I'm obviously new here, how do I ask him a question?

He'll stop by soon,
watch some tv in the mean while :smile:

He'll stop by soon,
watch some tv in the mean while :smile:

LOL good idea!

Just needed a few Ideas on how to build up my 2.0 for boost. I'm sick of replacing stock parts over and over, time for bigger and better. I have blown my head gasket and clutch.
I know the RS model is not exactly a speed machine, but this is going to be my project car this winter. I also think it would be a great sleeper with its stock rs trim.

it really all depends on how much money you are looking to spend on it... i will list most of my mods and what i will be replacing this winter.

for the block:
i had it bored and honed
JE Forged pistons
Eagle Rods
newer stock crank with new crank bearings to reduce the risk of CW
Aluminum Flywheel

for the head:
i had the head cleaned, valve seats reseated and guides gone through
Crower Cams
Adjustable Cam Gears
O/S Racing Valves
New Valve Springs and Retainers
newer stock rollers

for the turbo setup:
TD06H 20G turbo
Custom made turbo manifold
Custom made IC piping
Sperco FMIC
Custom made oil lines
Oil Pan from a 4G63
HKS SSQV BOV
Tial 38mm Vented External Wastegate
97 GST MAS

for the exhaust:
Custom made 3" turbo back exhaust w/o cat
Greddy SP muffler

for the fuel setup:
Nippon Denso 550 injectors
Walbro 255lph fuel pump

for the ignition setup:
MSD coil pack
APC 9.3mm Kevlar & Silicon high performance wires
Bosch Platinum +4 spark plugs

for accessories:
97 GST ECU (rewired the harness so it works with the turbo ECU)
100 Shot ZEX wet kit
AVC-R
S-AFC
ACT 2600LB Clutch

for the mods over the winter:
I plan on polishing and porting the head
Rebuild the block and put in a stroker kit
EPROM my ECU and get DSMlink

well let me know if you need any help or have any questions...

I also think it would be a great sleeper with its stock rs trim.

yea it would be a good sleeper, which is what i was planning on doing, but then i put a on FMIC, a HKS BOV, and a external WG that i vented, so it kinda defeats the point now! :biggrin: but its still fun when people come up behind you and start to rev their engines until you rev it once and they here your BOV, and the look on their face: PRICELESS ;)