spark plug wires installation

i know this might sound dumb but i took out my spark plug wires because i baught some new ones and now i don't know which holes to plug the wires back into


motor : 4g63

plz help...thanks


pitures or diagram would help alot


thanks again

Looking at the coil pack, the plug wires from left to right are 4-1-2-3. The actual order isnt so important, but 4 and 1 have to be on the left hand coil, and 2 and 3 have to be on the right hand coil. On a 2g, the coil pack bracket has 4-1-2-3 scribed on it. On a 1g, its sideways and in the intake manifold pocket, so i'm not sure if its there or if you can even see it. But its set up the same way IIRC. Just remember the two outer cylinders (4 and 1) and the two inner cylinders (2 and 3) stay together. If it doesnt run swap the pairs to the opposite coil, just keep the correct wires paired together. ;)