Spacer ?
89calais
12-10-2003, 09:46 AM
Hi Prelude lovers , I got a B20A in my car. Kicking out over 185 HP with all the mods I've done to it , About 160 to the wheels. I had an idea as I was replacing the head gasket the other day..
What do you think of a spacer for the Head to the Block to remove the "interferance valves" I realized you'd have to Up the compression and probably deliver a higher spark but those aren't serious issues , Maybe a higher injection of fuel. But with a tunable fuel pressure regulator , Easily done.
Tell me what think , Would it work , Why - Why not ?
It will be made with aluminum.
What do you think of a spacer for the Head to the Block to remove the "interferance valves" I realized you'd have to Up the compression and probably deliver a higher spark but those aren't serious issues , Maybe a higher injection of fuel. But with a tunable fuel pressure regulator , Easily done.
Tell me what think , Would it work , Why - Why not ?
It will be made with aluminum.
flylwsi
12-10-2003, 12:32 PM
not really...
there's too much work that goes into that.
you'd have to get higher comp. pistons, etc.
why not check out www.preludepower.com, they've got a 3rd gen forum.
pose the same question there...
there's too much work that goes into that.
you'd have to get higher comp. pistons, etc.
why not check out www.preludepower.com, they've got a 3rd gen forum.
pose the same question there...
Automotive Network, Inc., Copyright ©2026