Installing wet kit on b16

I'm picking up an NOS kit tomorrow and have never installed a kit before. I was wondering if anyone could give me detailed instructions on how to do it or lead me in the right direction. Is there a lot of wires you have to run?? Well thanks in advance

I'm picking up an NOS kit tomorrow and have never installed a kit before. I was wondering if anyone could give me detailed instructions on how to do it or lead me in the right direction. Is there a lot of wires you have to run?? Well thanks in advance


It is funny that ten or more people read your post but u get no help. I have a nitrous express wet system on my car and found that it was not too difficult to install. Both nx and nos are about the same. I have some instructions for installing a nos wet kit (not nx) that are over 20 pages long. If you give me your email address I will get you a copy.

Also you can contact Holley technical line if u run into any problems while installing your kit. The Mechanics will help you for free (you may be on a long distance call for a while). That number is (270) 781-9741.

Hope this helps

I have some instructions for installing a nos wet kit (not nx) that are over 20 pages long. If you give me your email address I will get you a copy.

Also you can contact Holley technical line if u run into any problems while installing your kit. The Mechanics will help you for free (you may be on a long distance call for a while). That number is (270) 781-9741.

Hope this helps
Or just use the instructions in the kit.

Well I got it in...and everything workED fine. I was out yesterday messing around and I tried going from 3rd to 4th and missed it and I just heard the rpm's go way up. My car started shaking and I pulled it over. Now it won't start it just clicks when I try and start it. I guess I floated the valves? Hopefully it's just a bent valve. Anyone have any other ideas on what it might be? By the way thanks for the help with installing it.