rear disk conversion?

will the complete rear disk conversion of a 93-97 Honda Del Sol fit in my hatch? if so what exactly do i need to pull from the car. please let me know asap thanks

The trailing arms should fit just fine. The 4g rear suspension is the same as the '94-99 Integra, which is the same as the '93-97 Del Sol. My buddy has a '94 Del Sol VTEC & he swapped his entire suspension with an ITR suspension. It was just a matter of taking off the old stuff & replacing it with the new. So the Del Sol stuff should work just fine on a 4g (or 2g CRX). However, I'm not sure about the e-brake cables.

You'll need to pull the rear trailing arms, & e-brake cables (I'd pull 'em, just to see if they work). You won't need the LCA's...they're the same as ours.

I thought it was just 90-93 teg rear disks that fit our cars? Not saying your wrong just that I have never heard that the newer teg brakes are a direct replacement for our drums.

If you have a DX and are planning to get a rear sway bar, you will need the LCA's cause the dx's don't have the mounting point for it. That's what I'm going to do when I do my brake swap, cause I'm planning on getting a sway bar.

hey thanks CZ-R! i am going to put those on a 91 si. well i won a ebay auction for what i think is a good price for a complete swap. check this out and let me know if i wil need anything else


item2446275250

I'll check it out when I get home. eBay is a :nono: at work :screwy:
The only other thing I can think you might need is the proportioning valve, but I'm not 100% on that. I'll know more when I get home & can check my manuals...