B20 myths.
hondacivic99sivtec
10-17-2006, 06:53 PM
the b20 out of the crv's. yeah i know. the bore size is 84 mil and you can not use the b20 out of the old prelude, because it leans back.
and i ain't the only one who answered!
sorry i didn't correct myself. but i since then found more information on the frankenstein.
and i ain't the only one who answered!
sorry i didn't correct myself. but i since then found more information on the frankenstein.
YZ125rider21
10-19-2006, 07:51 PM
brought back from the dead once again....member when I did my b20 project a few years ago...back then took forever cause I had a girlfriend that wanting everything and was hard funding parts for my car ;-)
crx-b20
08-11-2009, 06:03 PM
okay, i have a b20 in my crx... only problem is, is that it seems to be pulling the shifter linkage off the bottom of the car so that it is falling out! any ideas why this is happening?
Tony
08-11-2009, 08:49 PM
Don't bring up an old thread when you already have one going. It has nothing to do with your B20, it could be a b18, b16, or whatever in there. Its your linkage, no the engine.
crx-b20
08-11-2009, 09:53 PM
oh okay well a b20 will not drop in properly into a 1989 crx si. you can either order custom mounts or you will need to put spacers in the front two, and a plate on the bottom on the other
Tony
08-12-2009, 06:10 AM
Everyone knows a B-series requires a mount kit.
crx-b20
08-13-2009, 06:32 PM
so either tiger japan who did the swap didnt put them in, or the guy i bought the car from took them?
90civicrider
07-29-2011, 01:59 AM
Bump for a great thread! Don't let this one get lost :)
Automotive Network, Inc., Copyright ©2025