SOHC D16A6 Cam Shaft

Just got my 89 crx HF with low miles and was thinking of throwing a cam in. I bought a hf shell and dropped in the si motor and trans D16A6(motor was free).
pt#270-251-0012
Crane Cams has a nice grind, anyone have any experience with this cam?
Adv.Duration- 261°Int/263°Exh
Duration @ .050''- 206°Int/208°Exh
Gross Lift- .394''Int/.386''Exh
Lobe Separation- 108°
All I have for the car is a cold air intake, header, and cat-back. Any suggestions would be appreciated.
Was thinking if I got the cam, I would buy a ported intake manifold, skunk2 or obx. oh and some cam gears

Cant...pass...it....up how many cam gears on a SOHC?

Cant...pass...it....up how many cam gears on a SOHC?

Thanks man,"Cant...pass...it....up" that's the same thing I said to your ugly girlfriend when I blew in her ass!!!!!
snoogens

I like the SR909 from exospeed, for that they suggest a ported head and manifolds, you can use stock valvesprings with the stock limiter, but with valve springs you can raise the limiter and use it to the full potential.

If she is soooooo ugly then what were you doing? Maybe you pictured her as a guy explaining the blowing in the ass! 1 Hint of advice for AF is watch what you say to who or there will be a noobie flaming fest.

I would go with the deltacams 272 grind. has a nice hardcore lope at idle, and only costs $80 for the regrind.

That was a good one kinda like the ones I used in 5th grade. Anyways I have a gude cam in my car (very agressive) and you need to get a adj. cam gear. If not then you will never touch my fat ugly ol lady again.

No, just kidding it's cool man thanks for the responses, yeah I'd defintely get a adjustable cam "gear". Who else has a cam for the D16A6? All i can find is one at www.jegs.com and they have a very limited sport compact part of the site.

Contact gude I have their cam (its a bit pricey) but its the most agressive one that I have ever drove...

PART NO.:
HCCS07

DESCRIPTION:
Awsome power! A real plus with Bullfrog 2624 ECU.

POWER BAND:
4000 R.P.M. to 8200 R.P.M.

IDLE:
(Good)

SPECIFICATIONS:
Intake
LIFT -
0.415
DURATION -
241

Exhaust
LIFT -
0.421
DURATION -
228
Is this the cam, and how much did you drop on it?

Yea I dont rember exactly I got it in a deal but its shouldnt be more than $70 more than the other cams you find. E-mail them and ask. Hit the contact us button and tell them what you have and what you want. They will instruct you there.