Turbo non vtec D15....What Else?
93DXon18s
11-25-2003, 12:10 PM
i want to turbo my D15 for my 93DX, i am getting a Garrett AiResearch T3 turbo (Oil cooled, .42 A/R Compressor, 2 1/4" inlet, 2" outlet, .36 A/R Turbine, internal wastegate, standard T3 exhaust flange), downpipe, oil connectors, gaskets, all hardware, brand new pair of shaft bearings just in case, and swing valve cover/downpipe flange.
what i want/need to know is...what else do i need to custom make a turbo for my DX? i know i need an intercooler and the piping, but what else? since its a stock(with exception of intake, plugs, wires, cap and rotor, fuel filter and Mugen chip) non vtec engine, will i need new pitons or anything else internal for my engine? i know bigger injectors and fuel pump will be needed, just want to know any and everything else i will need for this project...pics wil be posted when i start the build up.
thanks ahead of time!
what i want/need to know is...what else do i need to custom make a turbo for my DX? i know i need an intercooler and the piping, but what else? since its a stock(with exception of intake, plugs, wires, cap and rotor, fuel filter and Mugen chip) non vtec engine, will i need new pitons or anything else internal for my engine? i know bigger injectors and fuel pump will be needed, just want to know any and everything else i will need for this project...pics wil be posted when i start the build up.
thanks ahead of time!
TEAM KLR
11-26-2003, 09:38 AM
hey man where are you located at?
93DXon18s
11-26-2003, 05:01 PM
near Albany, NY
TEAM KLR
11-26-2003, 07:51 PM
ok, alittle far, we are in Knoxville, TN. give me a call on monday and we will talk about your options.
KLR sport compact performance
4103 N. Broadway
Knoxville, TN 37917
865-688-8552 import dept.
KLR sport compact performance
4103 N. Broadway
Knoxville, TN 37917
865-688-8552 import dept.
GScivic7
11-26-2003, 08:47 PM
This is the shopping list I compiled. Pretty much covers everything. Just ignore the prices and website and all that jazz, just shit I listed so I don't forget where I planned on getting it
Turbo Kit
1. Garrett T3/T04E turbo -- www.hpautoworks.com $550
2. 26.75x6.4x3.5 intercooler -- www.motormatrix.com $275
3. Rev Hard Turbo Manifold -- www.motormatrix.com $449
4. HKS SSQV BOV -- www.hpautoworks.com $190
5. Tial 35m wastegate -- www.hpautoworks.com $225
6. Charge pipes -- Exhaust Specialties in Seattle
7. Downpipe -- Exhaust Specialties
8. Hondata s200 w/Boost -- C-Speed Racing in Bellingham $495
9. Intake & K&N Filter -- Exhaust Specialties & Napa
10. Walbro 255 lph Intank Fuel Pump -- www.importpoweronline.com $105
11. DSM 450cc Injectors -- www.thepartstrader.com
12. CRX resistor box -- www.thepartstrader.com
13. Apex'i N1 Turbo Exhaust & Carsound cat -- www.hpautoworks.com $524
14. Vaccuum lines, clamps & pipe connectors -- Home Depot or Napa
15. Fittings --
16. Oil lines --
17. Autometer gauges and gauge pod --
18. Greddy Profec B Spec-II Boost Controller -- $30
Turbo Kit
1. Garrett T3/T04E turbo -- www.hpautoworks.com $550
2. 26.75x6.4x3.5 intercooler -- www.motormatrix.com $275
3. Rev Hard Turbo Manifold -- www.motormatrix.com $449
4. HKS SSQV BOV -- www.hpautoworks.com $190
5. Tial 35m wastegate -- www.hpautoworks.com $225
6. Charge pipes -- Exhaust Specialties in Seattle
7. Downpipe -- Exhaust Specialties
8. Hondata s200 w/Boost -- C-Speed Racing in Bellingham $495
9. Intake & K&N Filter -- Exhaust Specialties & Napa
10. Walbro 255 lph Intank Fuel Pump -- www.importpoweronline.com $105
11. DSM 450cc Injectors -- www.thepartstrader.com
12. CRX resistor box -- www.thepartstrader.com
13. Apex'i N1 Turbo Exhaust & Carsound cat -- www.hpautoworks.com $524
14. Vaccuum lines, clamps & pipe connectors -- Home Depot or Napa
15. Fittings --
16. Oil lines --
17. Autometer gauges and gauge pod --
18. Greddy Profec B Spec-II Boost Controller -- $30
Rgacke
11-30-2003, 02:24 PM
Whether the "mugen chip" is real or a ebay copy, its programed w/ a higher degree of timing, not what you want for turbo.
Automotive Network, Inc., Copyright ©2025
