F/S Air Suspension Cylinders

I'm not really sure where to put this here...but here goes (a mod can move this if it's in the wrong place)

Aro Provenair Cylinders
4" bore
6" stroke
1 3/8" Stainless Steel Piston Rod
3/8" NPT ports
Dual action (perfect for 3 wheeling)
Square Profile Billet Aluminum Body
Internal bump stops
Buna N seals
Dual Side ported

these can handle up to 250 PSI

These are Manufactured by Ingersoll Rand.
and if you want to do any more reading on these...here is the Mfg. link

http://www.arozone.com/Products/provenair2.html

These are factory lubed and won't wash out. Fully rebuildable

These are originally off a 5th gen Accord...but will work on almost anything with new brackets
Bottom Brackets inluded on all 4 cyls
Top brackets included on only 2 cyls (easy to make the other 2...I'm including the needed plate steel)

They are Used and these have zero scratches on the piston so the is no leakage. I never had a chance to install them on my car...so they've just been sitting in my basement for about 6 months since I bought them.

My plans changed (again... :wink: ) so I just need to sell these off
They go for $375 USD EACH when they are New ($1500 US/4)

I just want to sell them off..so $800 CDN for all 4 Cylinders is all I want (that's $200 Cdn Each :P )

http://invis.free.anonymizer.com/http://community.webshots.com/s/image4/9/70/57/70297057YQYLsg_ph.jpg

http://invis.free.anonymizer.com/http://community.webshots.com/s/image7/3/25/94/100032594tgfCHw_ph.jpg

http://invis.free.anonymizer.com/http://community.webshots.com/s/image4/3/26/49/100032649ovtiOB_ph.jpg

You can see how big of a stroke that these things can do.

I live over near Brantford..so I can meet halfway for delivery or whatever if you live in southern Ontario. So shipping these guys isn't really a big issue.

my e-mail is [email protected]

thanks
Drew