Turbo install
kaoticivic
11-23-2003, 11:58 PM
Has anyone out there installed a Full Race T3/To4E turbo set up on a b16A yet? If so I could really use a step by step. Thanks
civic15.8
11-24-2003, 04:42 PM
it should be done just like any other turbo do you have the old style piping or the style that the piping goes into the back of the intercooler
kaoticivic
11-27-2003, 10:50 AM
The new kind that hooks up in the back. As far as "like any other turbo install" I've never hooked one up before, this will be my first, so any new thoughts or hints?
civic15.8
11-27-2003, 11:12 AM
http://www.revhard.com/installinstructions/INSTALL%20GUIDE%2094%2B%20INTEGRA92%2B%20CIVIC.pdf
that link is instruction on the old style piping on a turbo
now the full race on the other hand the turbo hooks up to the exhaust manifold the the compressor sid of the turbo hooks staight up to the back of the intercooler (unlike the old style that hooks to a pipe that comes from the compresor side) then you run a pipe from the outlet of the intercooler to the throttle body. mak sure you have oil go through your turbo so it will not go bad. and then have a oil return line that go to the oil pan you will need a fuel system and i suggest looking into hondata if not that then apexi
that link is instruction on the old style piping on a turbo
now the full race on the other hand the turbo hooks up to the exhaust manifold the the compressor sid of the turbo hooks staight up to the back of the intercooler (unlike the old style that hooks to a pipe that comes from the compresor side) then you run a pipe from the outlet of the intercooler to the throttle body. mak sure you have oil go through your turbo so it will not go bad. and then have a oil return line that go to the oil pan you will need a fuel system and i suggest looking into hondata if not that then apexi
Automotive Network, Inc., Copyright ©2025