school project (alarm clock)

Maybe you still remember my previous post were I asked you to choose one concept, well here is the end result. I couldn't keep the shape I wanted because I hadn't had enough room for the electronical components:mad: . Here it is

http://communities.msn.com/_Secure/0LAAAAH4PolfbZXFqd1pxQa1H814qM0hAy2Ez5G0PuINS8dhjV rtatkoXo7N4J61UdyEMaGMk80Q/wekkerph2.jpg

BTW: thanks again for your help.

Cool, which one was that originally again?

If I´m remembering right it wasn´t in the old list! But I like this design more than most of the old designs!!:)

This was the one that came best out the test. I had to make some serious changes to get all the components in.

http://photo.msn.s8.com/MS8zLzAvMS8xMDg3LzE1NS8zMi9lcHVBbG1VQlNnS29WTWg0Vm 1ESG13/d4143bb940a7bad621f506bf4379172e/clbk=0h9xCkj4Yyo6VbTdcNrmhglJSkAWB6C9QdXb*iFN7YvvN wYPrL2244lAOpyNt3xc1SuwR!bUawSzw43D0fXlRoO6U*F7CsW Eow18lDVkZsNJ5dn6tDWmnczrTD4z1bGb0mlSnPsHPSHuJW5lK YXUS5MDpVhE9ZD48oQ0Xf25AKPL9V!iye0kftfwSwb49wO7fP2 0L0TlRxJLoS1lQO2mYfUtaDCgzetEl*2bMzQlP2dbtdqpmhWBc 0plfEcK8JZIFzOfT8fgE6P*ApdLEZ!BOZlONHihJJdBOUSYkZ! ow9YW!XuSFm4AhtNKQwNN6h4i/jpg.jpg

IMO the new design is a lot better!!

Thanks

Looks nice.... is it made in pro engineer?

Originally posted by AccordCE8
is it made in pro engineer?

Yes it is. How did you know?

On my work I'm busy with finding new software for our fem - work (finite elements)... we're now using Ansys but thinking of buying another package like pro-engineer combined with pro-mechanica for better 3d solid modelling. I've seen some examples and they look alike. It could have been solid works also I think. Have you experience with solid works? what do you think works better for modelling... solid works or pro-e? especially when modifing dimensions afterwards?

I only have experience with Pro-E, so I really can't compare with other programs. Drawing in Pro-E is very easy, the only problem is the rendering of the pic. Most people I know cut and paste the image from Pro-E to 3Dstudiomax to render it.

You can alter dimensions afterwords very easy in Pro-E if you have put values at the sketch. If you haven't done this you have to go back to the sketch and this takes a bit longer.

well okay... thanks