where to get a used engine 90 STD
spayordie
11-22-2003, 09:10 PM
So where would a feller get a good running, reasonable mileage, used engine for a 90 Civic DX STD, and how much should he pay for it, and how bad is shipping?
H4Bangin
11-22-2003, 11:14 PM
go to a junkyard $200 - $400
Dumped91Hatch
11-23-2003, 12:33 AM
not worth it. Might as well go for a vtec swap.
spayordie
11-23-2003, 03:23 AM
OOooooohkay....I knew this was gonna be a question I had to ask eventually...understand now this's just a $200 beater/daily driver type car we're talking about and all. What the hell's a Vtec?
KoRnSaQ
11-23-2003, 03:28 AM
What the hell's a Vtec?
Do you know anything about Hondas???
Do you know anything about Hondas???
Dumped91Hatch
11-23-2003, 03:30 AM
Do you know anything about Hondas???
Obviously not!
Obviously not!
spayordie
11-23-2003, 03:49 AM
Ahh you guys. I know the last Honda I bought is still running with just bare maintenance after 200k miles, 80k of which I put on it after buying it for $460. I know my wife's been driving them forever. I know I can get one with a bad head gasket for $200 this thanksgiving if I can fix the gasket well enough to drive it 600 miles three days later and I know they often smoke after the head gasket and valves are done SO it seems prudent to consider just throwin' a whole engine in there as an option. And I know how to do that. I know how to get a bonded title on it without more than a bill of sale, too. You boys just stand down a little, okay? It was just a rank amateur question and I thought maybe you could send me to cheaplowmileagehondaengines.com or something. Jeeez.
FuLL BLown STD
11-23-2003, 07:31 AM
heres a direct swap for ya, only thing u have to do is swap that carb wit ur dpi, plus the engine got 30-40 thousand miles on it. in other words its damn close brand new! http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=46098&item=2444339400
or try car-part.com goodluck
or try car-part.com goodluck
4GZChatch
11-24-2003, 09:30 AM
I have one here in a local wrecking yard, 1.6L Si w/trans for $400, you'd have to pay shipping too... I think I heard that the splines on the tranny are different from the STD to the Si or other D-series, so you may end up having to change your trans too... Otherwise, I can get you a 1.5L VTEC motor for $550 shipped...
91civicDXdude
11-24-2003, 10:49 AM
If you're looking for direct replacement engines, you have a couple of options:
D15B1 (what you have now)
D15B2
D16A6
D15B7
SOHC ZC
All of these will bolt right in and since there are five to choose from, you have a better chance of finding one.
you can find those engines online (atleast the 1.6L versions, D16A6 and SOHC ZC) for about $500 shipped with around 30,000 miles on them. If you want cheaper still, you might check around your local scrapyards, or check ebay.
D15B1 (what you have now)
D15B2
D16A6
D15B7
SOHC ZC
All of these will bolt right in and since there are five to choose from, you have a better chance of finding one.
you can find those engines online (atleast the 1.6L versions, D16A6 and SOHC ZC) for about $500 shipped with around 30,000 miles on them. If you want cheaper still, you might check around your local scrapyards, or check ebay.
Automotive Network, Inc., Copyright ©2025
