Supercharger removal
drhanvy
11-22-2003, 01:40 PM
I'm attempting to remove and replace the supercharger on my 97 GTP. I would appreciate any help re how the tubing lines which are routed over the top of the unit are removed. :banghead: Thanks
Ripn12s
11-22-2003, 05:20 PM
Those r your fuel rails.
They have 4 bolts holding the part on and a center bolt on top.
First I would release the fuel pressure by opening the gas cap.
After that its a matter of removing the bolts and the wiring clips that are attached to each injector. Then pull up. Its pretty simple, just take your time.
They have 4 bolts holding the part on and a center bolt on top.
First I would release the fuel pressure by opening the gas cap.
After that its a matter of removing the bolts and the wiring clips that are attached to each injector. Then pull up. Its pretty simple, just take your time.
drhanvy
11-22-2003, 06:29 PM
Thank you. I got them off without screwing anything up. Looks like I'll be spending a little time cleaning up around the ports now. Do you have any suggestions for softening up the base and throttle body gaskets which are stuck like cement.
Automotive Network, Inc., Copyright ©2025
