cd player installation

i have a 1995 toyota tacoma and i was wandering if any one nows how get molding off so i can install my new cd player.i've got close but still cannot get it off please help. or if you now how i can find out please tell me.
thank you,
bluefin

go to http://forum.sounddomain.com/, you may find some helpful info, i dont know either, i have 2002, it easy on mines, just take air conditioner knobs and get a screw driver to pull that dashboard out, i found some helpful info on that website.

i have a 1995 toyota tacoma and i was wandering if any one nows how get molding off so i can install my new cd player.i've got close but still cannot get it off please help. or if you now how i can find out please tell me.
thank you,
bluefin
first remove heat/cool knobs. use a small flat screwdriver to pop out a/c switch if you have. heat/cool face is clipped in. use same screwdriver. there are two screws behind this plate. there are push in clips under each corner of center cluster panel. be careful not to pry too hard. this panel distorts easy. good luck.