Need Help on remote starter

I just recently bought a bulldog remote starter and entry system on for my 94 LS sedan. I am having a very hard time figuring out the way things wires. I am sure the intruction saids it pretty well, but i can't seems to locate the wire for the ignition and the door locks. I don't even know how many wires are there for the ignition switch ( 2 grounds or something :( )........can any one help?

:nono: I feels sorry for you, the door lock wires are really hard to get to, they are burried behind alot of stuff on the left hand side , down by the pedals.

And the ignition has 2 wires I think, both positive, Its been awhile sense I installed a remote start, give me the model number of the alarm and i will try to help you further.

While we're on the subject, how about being able to start it with out having to push on the clutch? I have an Omega Max, and they were gonna charge like 200 to do it at some car stereo place.

you have to bypass the clutch switch in order to use the remote start to start the car. the switch should be on top of the clutch pedal.

i heard u if u snip the yellow wire it'll start w/o clutch.

I accually have a automatic, so it'll easier to wire. But i still haven't figure out how.......: (

i heard u if u snip the yellow wire it'll start w/o clutch.

It depends on what kind of switch it is. Some you can cut the wires, some you can just unplug the switch??? I prefer to use a relay and install a motion sensor so if the car takes off, the motion sensor would cut off the remote starter.

WIRE COLORS LOCATION
12 VOLTS CONSTANT WHT IGNITION HARNESS
IGNITION 1 BLK/YEL IGNITION HARNESS
IGNITION 2 WHT/BLK(95 ONLY) IGNITION HARNESS
ACCESSORY/HEATER BLOWER 1 YEL IGNITION HARNESS
STARTER BLK/WHT IGNITION HARNESS
PARKING LIGHTS RED/GRN(+) GRN CONN @ FUSE BX
DOMELIGHT LT GRN/RED(-) BLU CONN @FUSE BX
PWR DOOR LOCK BLU/WHT IN LARGER OF 2 GRY CONN
PWR DOOR UNLOCK BLU/RED BEHIND CRUISE MOD DRV KICK PANEL (TYPE B)
TACH SENSOR BLU @DISTRIB
BRAKE
GRN/WHT(+) @SWITCH ABOVE BRAKE PEDAL
HORN
BLU/RED(-) @RELAY ON LEFT SIDE OF FUSE BLOCK


Now, if you look at your fuse panel under the dash, there will be some empty spades, test them because you should fine the doorlocks, domelight, and other items since that's where the OEM alarm hooks into.

Thanks guys, This really help alot. Let you guys know when i got it installed, it's been very cold last few days, can't stay out....:)

I've used a bullbog remote starter for a year now and love it (have the door/truck modules too). But my question is : where on the distributer do I wire in the tach sensor? (it's an electronic Distrib)

Right now the car just starts every 15 seconds until it see's that the engine's running.

I've used a bullbog remote starter for a year now and love it (have the door/truck modules too). But my question is : where on the distributer do I wire in the tach sensor? (it's an electronic Distrib)

Right now the car just starts every 15 seconds until it see's that the engine's running.

Connect the tach. input wire from the remote starter to the wire that has AC voltage at the coil.

hey guys, i just got a remote start for my 98 civic... that whole color chart that sumone gave... can that b used as a guide for my car too or are they different?? sumone let me know please.. thanks in advance!

hey guys, i just got a remote start for my 98 civic... that whole color chart that sumone gave... can that b used as a guide for my car too or are they different?? sumone let me know please.. thanks in advance!
http://bulldogsecurity.com/New%20Wires/New%20Wires/Wires/honcivic96-98.htm

:loser:

thanks so much.. i appreciate it.. hopefully everything works out