Eclipse turbo on a civic dx?

has anyone done this or give me any kind of info on what kind of psi i should be driven at im guessin like 10 maybe becuz i want to buy my friends for $100 cuz he is sellin his 98 eclipse and he said hell give me the turbo since it will fit on my civic i have a d16 engine.(98 civic 4dr dx) also i want to kno how much hp should it add at that many psi? and would i need to buy any new pistons or anything? im new with the turbo so dont flame me yall aight thanx for the info. for the coo peeps thats helpin me out. take care.

Yes the turbo itself will fit. It's the same turbo that comes with the Greddy SOHC kits. However, you will need much more than just the turbo. Try The Parts Trader www.thepartstrader.com for used parts to build your kit with.

Here's a good board that deals with turbocharging D16s:

http://pub19.ezboard.com/fturbod16forumturbod16

say thanx for that website i luv it, it has everything i want to kno about turboed d16 hehehe appreciate it

I have the plate to convert your stock manifold into a turbo manifold...let me know

oki one is how do you change the psi on the stock turbo and secondly what do you mean change the stock manifold to a turbo? you cant use the same one? o and another is how much would it cost for the other stuff for the turbo some people told me it cost them a lil over 200 like about 230 or so and that was jus with the turbo for free not including wastegate and all that... cuz im gettin the turbo, waste gate and the oil line and something else also with it i think... i dont kno i need to talk to him well thanx for the responses yall.take care

Originally posted by Greenh0rnet
oki one is how do you change the psi on the stock turbo and secondly what do you mean change the stock manifold to a turbo? you cant use the same one? o and another is how much would it cost for the other stuff for the turbo some people told me it cost them a lil over 200 like about 230 or so and that was jus with the turbo for free not including wastegate and all that... cuz im gettin the turbo, waste gate and the oil line and something else also with it i think... i dont kno i need to talk to him well thanx for the responses yall.take care

1. either by adjusting the wastegate spring or with a boost controller

2. you can use a stock CX, HF, HX, or newer DX manifolds with a plate to adapt a t-25(or similar mistubishi turbo) on it...

3. as for the cost of other neccesities, it depends on what brand you get or where you get it from...

hmmmm oki then thanx for the info if need anymore ill reply on this website.