1998 Blazer Keyless Remote Programming Instructions
kervon
10-18-2003, 12:20 AM
Hi, anyone knows how to program the keyless entry for a 98 blazer ? I tried searching for it in the forums but didn't turn out anything ...
Any help would be greatly appreciated. Thanks!
Any help would be greatly appreciated. Thanks!
GMMerlin
10-18-2003, 07:46 AM
Transmitter Programming
Important
Different keyless entry systems are used on General Motors vehicles. The parts are not interchangeable even though the parts may appear to be similar. Observe the back of the transmitter in order to properly identify the system. On 1998 S/T pickups and utilities, use a transmitter identified with GM/UTA preceding the part number.
With the driver door closed, hold down the power unlock button on the door panel.
Turn the ignition switch to the ON position.
Turn the ignition switch to the OFF position.
Turn the ignition switch to the ON position.
Turn the ignition switch to the OFF position.
Release the power unlock button on the door panel. The remote control door lock receiver will respond in the following manner in order to indicate that the receiver is in the programming mode:
Locking the doors
Unlocking the doors
Important
All extra transmitters must be programmed at this time. When a new transmitter is programmed, it will deactivate the old transmitters.
Hold down the lock and unlock buttons on the transmitter until the remote control door lock receiver will respond in the following manner:
Locking the doors.
Unlocking the doors.
Repeat step 7 for each additional transmitter.
Turn the ignition switch to the ON position in order to exit the transmitter programming mode.
Important
Different keyless entry systems are used on General Motors vehicles. The parts are not interchangeable even though the parts may appear to be similar. Observe the back of the transmitter in order to properly identify the system. On 1998 S/T pickups and utilities, use a transmitter identified with GM/UTA preceding the part number.
With the driver door closed, hold down the power unlock button on the door panel.
Turn the ignition switch to the ON position.
Turn the ignition switch to the OFF position.
Turn the ignition switch to the ON position.
Turn the ignition switch to the OFF position.
Release the power unlock button on the door panel. The remote control door lock receiver will respond in the following manner in order to indicate that the receiver is in the programming mode:
Locking the doors
Unlocking the doors
Important
All extra transmitters must be programmed at this time. When a new transmitter is programmed, it will deactivate the old transmitters.
Hold down the lock and unlock buttons on the transmitter until the remote control door lock receiver will respond in the following manner:
Locking the doors.
Unlocking the doors.
Repeat step 7 for each additional transmitter.
Turn the ignition switch to the ON position in order to exit the transmitter programming mode.
cannon73
10-20-2003, 02:55 PM
:banghead: I used this programming sequence for my 98 Blazer and it does not work. Is there any other way to program new remotes. I have two but I want to program two more. Any help will be gratl :banghead: y appreciated.
kervon
10-20-2003, 04:48 PM
:banghead: I used this programming sequence for my 98 Blazer and it does not work. Is there any other way to program new remotes. I have two but I want to program two more. Any help will be gratl :banghead: y appreciated.
Yep, I tried it too. Didnt work...
Yep, I tried it too. Didnt work...
kervon
10-20-2003, 05:48 PM
I tried the second time, it WORKED ! Thanks GMMerlin for your help. Ya da man!
Automotive Network, Inc., Copyright ©2026