cams? performance?

Anyone know where I can find a cam for my mr2? I'd like something asymetrical, if possible, so I can be agressive with the intake, but not bleed it all out on the exhaust side.

I've been looking around this forum...and dont see lots of technical talk. All I ever see is the typical exhaust, or K&N intake. Anyone know where I can get a cam?

Are there any other forums that are for the mr2 out there?

well do you have a turbo or na the best cam for the turbo is 264 some go with 272 but thats just rediculous. as far as n/a i don't know alot about them sorry. go to mr2.com scrool down to the mr2 message board sign up and check it out they have a section for everything turbo,n/a,jspec etc etc.later
mitch

you mentioed you wanted it to be assymetrical then why do you only want an intake cam your going to run into problems with the air being left in the cylinder becuase the exhuast valves are compensting for the extra intake cam lift.later
mitch

I suggest going with HKS cams, I have been very happy with them and you can purchase them asymetrically.

There is an MR2-only forum located here:
http://www.board.mr2faq.com/

Also, I have a set of 3SGTE cams on eBay that end in three hours:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=33614&item=2438446188