My go at making fart cans...errr...tuner mufflers
Diesel2NR
09-28-2003, 12:33 AM
Made with all polished aluminum tubing accept for the part in then end where it hooks up the the tailpipe, which is styrene so that it can be hooked up to a 3/32" piece of styrene. Not sure if I'm going to make a bunch to sell...seems too time consuming. I like it. It's smaller than what I've seen from everyone that's selling them, and looks better in my opinion, but opinions are like assholes...everyone has one. :evillol:
Sebstar
09-28-2003, 01:07 AM
looks good on the ITR. I would suggest putting the muffler on a bit of an angle, looking towards the right side of the car and a bit upwards... it adds to the realism :biggrin:
to be honest it looks a bit small for my taste. which sounds kinda weird considering big basketball launchers look very rice on ITRs, hehe
nicely done though
*ps, how much did it cost you to make?*
to be honest it looks a bit small for my taste. which sounds kinda weird considering big basketball launchers look very rice on ITRs, hehe
nicely done though
*ps, how much did it cost you to make?*
youngdrifter_x
09-28-2003, 02:08 AM
Will that be difficult to make? piping and all?
Snooker
09-28-2003, 05:13 AM
The muffler looks cool, the size is ok. I always say: Huge muffler, small cock. :icon16:
EMAXX
09-28-2003, 09:45 AM
Looks good. The size is perfect. Not too big, not too small. Looks good on the back of the Teg.
mstngcobrasvt98
09-28-2003, 11:00 AM
youngdrifter x: It all depends on how much time you have. I've done full systems from the collector down and they are sometimes hard. But I use all aluminum tubing so....go at it and try it for yourself.
youngdrifter_x
09-28-2003, 12:30 PM
I'm working on one right now. But its the resonator thats difficult. i cant get the piping quite right, oh well i'm not done yet.
Diesel2NR
09-28-2003, 02:00 PM
It wasn't hard to do at all. Just some polish, pipe cutting, trimming, and filing with a little bit of superglue tossed in the mix. the muffler's about 1" in length and I used 3 different diameters of tubing to make it...so I'd say it too me about 10 cents to make it. Very cheap. Took me about 15 minutes because I was making sure everything was right.
bobby28384
09-28-2003, 02:41 PM
The muffler looks cool, the size is ok. I always say: Huge muffler, small cock. :icon16:
Its not the size that counts; it's how you use it. :thefinger
Its not the size that counts; it's how you use it. :thefinger
Snooker
09-28-2003, 02:47 PM
Its not the size that counts; it's how you use it. :thefinger
Yeah, you're damn right! :icon16:
Yeah, you're damn right! :icon16:
youngdrifter_x
09-28-2003, 02:52 PM
True true.....I like 3" thats what i have.....on my car that is... :rofl:
SonyMobile
09-28-2003, 03:35 PM
looks pretty good to me, sizes doesnt matter its how you use it... :lol: lmao, the only ppl that say that are the ones with the small unit in the first place! :rofl:
Integra14
09-28-2003, 03:39 PM
looks sweet but itr is 1/25 so on 1/24 is will look like a tiny stock one
blueboost
09-28-2003, 06:25 PM
its OK but the wall of the can and the tip look to thick man. I like it thinner looking like this... makes it look lighter
http://web.tampabay.rr.com/blueboost/images/mysilviabutt.bmp
http://web.tampabay.rr.com/blueboost/images/mysilviabutt.bmp
youngdrifter_x
09-29-2003, 12:04 AM
blueboost i cant see anything.
blueboost
09-29-2003, 11:33 AM
sorry, try it now!
youngdrifter_x
09-29-2003, 05:24 PM
I like that exhuast. Except for the carbonfiber look. I like it thing too. because it looks more real...i havent seen a thick looking one before...
Automotive Network, Inc., Copyright ©2025