Crx Axles..

ok..I have a 91 crx Dx..its automatic..Its in the shop now..im changing it to stick an puttin in a Sohc ZC...Can the axles on now fit the Zc.. :screwy: Thanx

I don't have an answer to your question, but how much is it costing you to put in a manual transmission?

Welll...I gotta pretty pretty good deal...300 bucks..!!!
thas to do the swap...change over to stick..wire for MPFI...thas a steal if you ask me..

thats a big steal in my book also...shops out here charge an arm and all 3 legs for a tranny conversion.

i've done a lot of my homework on the zc swap on a dx auto, as far as i can find you need to get new axles or build your own, raxels.com carries custom build axels for the swap, but there gunna run you about 250ish US

Thanx alot man...I traded in my old axles an payed 80 for two new ones...the car is comming out the shop tonight..I cant wait...I will keep you guys posted...

86-89 Integra axels work the best...

That is an insane deal man!! Congrats on finding someone to do it for that cheap. I was looking around and have had a hard time finding someone who will do it for even twice twice that much!

welllll everything is wired up an ready to go...have my exedy clutch an flywheel in place....but the only thing is that the rear engine bracket it different an I dont kno which one to use....remember im doing auto to stick so the bracket on there now is for a auto tranny...anyway..I will keep you guys posted..

welllll everything is wired up an ready to go...have my exedy clutch an flywheel in place....but the only thing is that the rear engine bracket it different an I dont kno which one to use....remember im doing auto to stick so the bracket on there now is for a auto tranny...anyway..I will keep you guys posted..


if you mean the one closest to the firewall, i believe you need to bolt the mount in the other set of holes, closer to the passenger side of the car. dont quote me on that though, every 4g ive ever owned was a stick.

get the rear bracket from a manual dx or si or ex. The axles have to be manual as well. Don't get hf or std axles.