how much power
white r33
09-13-2003, 08:27 PM
what sort of power can i expect from r33 gts-t with
t04r, apexi intercooler, trust manifold, 3inch exhaust to cat and 31/2inch cat back, apexi filter, twin plate clutch,i will be using hks evc-v boost controller
thanks
t04r, apexi intercooler, trust manifold, 3inch exhaust to cat and 31/2inch cat back, apexi filter, twin plate clutch,i will be using hks evc-v boost controller
thanks
RazorGTR
09-13-2003, 09:05 PM
About 325hp before it goes bang with the mods listed.
white r33
09-13-2003, 09:08 PM
what do you mean by goes bang and why will this happen can you give me some ideas on what to do as i am new to the scene
RazorGTR
09-13-2003, 09:12 PM
Your factory fuel pump, injectors, fuel pressure regulator are way too small. No fuel means detonation and or so lean it burns the tops of the pistons.
The R33 has higher compression ratios factory to tolerate much boost over 1 bar for very long. Your factory pistons are weak and know for crushing the top ring land. Also factory conrod bolts are not the greatest either. The factory ecu will not allow you over 13psi before it hits a boost cut. Over riding that in some fashion is a recipiet for disaster.
The R33 has higher compression ratios factory to tolerate much boost over 1 bar for very long. Your factory pistons are weak and know for crushing the top ring land. Also factory conrod bolts are not the greatest either. The factory ecu will not allow you over 13psi before it hits a boost cut. Over riding that in some fashion is a recipiet for disaster.
SkylineUSA
09-14-2003, 02:17 AM
Well said there Razor, but I thought they all had 8.5:1 comp ratios.
white r33
09-14-2003, 02:32 AM
if the fuel system (regulator,injectors,pump)is upgraded will the internals handle the power. the parts in question are on a front cut i am buying so i hope the works have already been done. what sort of price is it going to cost to change head gasket and rod bolts
SkylineUSA
09-14-2003, 04:10 AM
Can you give a complete run down of what you want to do?
What intensions do you have for the car?
If all the parts are changed out, it will come down to the tune of the engine. That is what will make or break an engine.
What intensions do you have for the car?
If all the parts are changed out, it will come down to the tune of the engine. That is what will make or break an engine.
SkylineUSA
09-14-2003, 04:13 AM
Oh,
If you are going to do that to a GTSt, why not sell the darn thing and get a real Skyline :grinyes:
If you are going to do that to a GTSt, why not sell the darn thing and get a real Skyline :grinyes:
white r33
09-14-2003, 04:55 AM
with the parts mentioned what else do you recommend to do without modifying internals i would like 300/350rwhp i am using iridium plugs
white r33
09-14-2003, 05:23 AM
i may have missed that my car is a r33 gts25t not gtst does this make difference i hope so will the mods be worthwhile now
Automotive Network, Inc., Copyright ©2026
