02 Silverado Wiring Schematic

I am in the process of wiring in a set of lights on my running boards and have found that a simply pin switch is not what is used now for the courtesy lights. If someone has a factory service manual and could send me an e-mail with a copy of the section I need I sure would be greatful. Thanks for your time and thanks in advance for your help. Ken [email protected]

I am in the process of wiring in a set of lights on my running boards and have found that a simply pin switch is not what is used now for the courtesy lights. If someone has a factory service manual and could send me an e-mail with a copy of the section I need I sure would be greatful. Thanks for your time and thanks in advance for your help. Ken [email protected]

Use tan for the drivers door located in pin B4 of the purple plug, and for the passenger door it will be a orange in pin B2 in the purple plug or dk.blue/white in pin B11 of the lt.blue plug, must diode isolate these wires.

The BCM is located behind the drivers side of the dash. The plugs on the BCM face towards the rear of the vehicle. The parking lights are in pin A5 and the headlights are in pin A11.