having problems with my jimmy (vortec engine)

well to start this off when i would come to a stop my jimmy stalled. took it to a shope and they said it was the fuel pump. so we had that replaced. (and yes the filter too) then went to start it up and it still wouldn't start. put in a new computer..and then replaced the cpi and nut kit, and a tps. now when we want to start it, you have to have your foot on the gas, and keep it there to keep it running. anyone know what might be wrong with it? i have spent alot of money on it the last 2 months, and am running out of money to just replace good parts.... thanks
it is a 1992 Gmc Jimmy 4.3 vortec cpi, has 169,000 miles on it

hey kandy :)

Heres another website to check out, to post this question.
http://www.s10planet.com/forum/default.asp

Also post, on this website, if you haven't already, in the s-10 blazer forum.

Im rob_0126 from car chat :)

Robert

:lol2: Hey Rob,
thanks for the other link to go to. i am going to be ordering the iac tomorrow. found out if we unplug it then it will start up just fine and run. ( just at a higher idle) so hopefully this will fix my baby. :frown:
Michelle

well to start this off when i would come to a stop my jimmy stalled. took it to a shope and they said it was the fuel pump. so we had that replaced. (and yes the filter too) then went to start it up and it still wouldn't start. put in a new computer..and then replaced the cpi and nut kit, and a tps. now when we want to start it, you have to have your foot on the gas, and keep it there to keep it running. anyone know what might be wrong with it? i have spent alot of money on it the last 2 months, and am running out of money to just replace good parts.... thanks
it is a 1992 Gmc Jimmy 4.3 vortec cpi, has 169,000 miles on it


hey i have a 94 jimmy and i am having the same problem i also have replaced fuel pump and filter brain twice, cpi twice, distributor, map sensor, throttle pos sensor, egr valve, coolant temp switch, coil, all tune up parts, please help me have you found out what was wrong with yours
thanks randy

hey where did u find the iac on the truck please help
randy