You know how to take off a shift knob from a 94 nissan sentra

Hey, If anyone knows how to take off a shift knob from a 94 sentra leave me a message. It sounds stupid but i`m havin trouble with it. I tried twisting it off and it didnt budge. So if ya know anyway juss leave one. LATAZ!

A thick towel, vise grips, and two hefty fore arms! :crying:

Hey, If anyone knows how to take off a shift knob from a 94 sentra leave me a message. It sounds stupid but i`m havin trouble with it. I tried twisting it off and it didnt budge. So if ya know anyway juss leave one. LATAZ!

Yeh well thanx but one more thing what if it doesnt work i tried before but without the towel and it didnt move it juss kept on twisting around and like little peices of rubber would like come off from the twisting. This thing is driving me nuts man :banghead: .

:banghead: Well to be honest I had to take a saw and litterally cut mine off of the stick shaft. The glue they use to bond those things is like cement. By the time I was done removeing it it could not be reused. There is a hard plastic thing under the boots leather cover so do not worry about cutting the stick shaft. I was tough and plastic trimmings were all over the car when done, though at last, it was worth it. Took like a half an hour too. -Greg

:banghead: Well to be honest I had to take a saw and litterally cut mine off of the stick shaft. The glue they use to bond those things is like cement. By the time I was done removeing it it could not be reused. There is a hard plastic thing under the boots leather cover so do not worry about cutting the stick shaft. I was tough and plastic trimmings were all over the car when done, though at last, it was worth it. Took like a half an hour too. -Greg

LOL sorry man for all the ???'s but should i take like a razor and slice the knob off or just cut it off wit the rod and the shift knob on it? lol
-BES-

You should only use a razor to cut the leather off of the knob, if you so choose. I am telling you from :nono: experience the knob is too thick to cut with a razor you will need some sort of electric jig saw or a manual saw and a hellafied forearm. The razor will just split and cut you. :banghead: -Greg

87SENTRASE is exactly right, the shift knob on my 01 SE was an absolute bitch. I ended up cutting the rubber off with a hacksaw and then using pliars to get the plastic ball off. When I was done with it it was an ugly mess, but I was replacing the whole shifter anyway so it didn't matter.

With that plastic dust all over the mats, console, and you. Take our advice bro. . . Electric Jig Saw and a careful hand you do not want it to gouge you in dash 6-disc (B15 owners) then it will co$t you some :2cents: centabos! :banghead: -Greg

P.S. I love the guy who invented the banghead! Keep on bangi'n lil bro! :banghead: