turbo spoon engine
blatch
12-01-2001, 05:58 PM
How much horsepower/torque could i get from a turbo'd spoonsports b18c5 enigne?
hehe. Just wanted to pop this forum's cherry.
hehe. Just wanted to pop this forum's cherry.
Racing Rice
12-01-2001, 08:23 PM
Well That really depends on how it was built. Compression, what type of rods and pistons.. Remember.. Spoon can build turbo motors just as well as they can build NA motors. Im sure theyll build you whatever you want as long as your paying..
Either way tho.. Itll be quality for sure..
Either way tho.. Itll be quality for sure..
Prelussion
12-01-2001, 10:49 PM
First of all your gonna need to know how a turb engine works, like spoon ITR engine = Really Really High Compression
turbo+high compression= you blowing a 10k motor. and you would be better off turboing a crv engine w/ port polish, and valvetrain and mate it to a ITR tranny then you would be a spoon engine.
turbo+high compression= you blowing a 10k motor. and you would be better off turboing a crv engine w/ port polish, and valvetrain and mate it to a ITR tranny then you would be a spoon engine.
VTEC_boi
12-01-2001, 10:53 PM
OMG, Spoon is a Japanese N1 Endurance race tuner. NOt some USDM drag race builder.
Spoon has high profile, high overlap cams, 11.1:1+ compressio ratios, NA tuned ECUS...
NO such thing as a Spoon turbo motor.
that's F&F bullcrap
peace
boi
Spoon has high profile, high overlap cams, 11.1:1+ compressio ratios, NA tuned ECUS...
NO such thing as a Spoon turbo motor.
that's F&F bullcrap
peace
boi
CivSiGuy
12-01-2001, 11:33 PM
Originally posted by Racing Rice
Well That really depends on how it was built. Compression, what type of rods and pistons.. Remember.. Spoon can build turbo motors just as well as they can build NA motors. Im sure theyll build you whatever you want as long as your paying..
Either way tho.. Itll be quality for sure..
lol.. man.. NA only for Spoon.
http://www.spoonsports.com/index2.html
http://www.spoonsports.com/engine1.html for engines
We are talking insanely precise, high compression, extreme output B-series motors from Spoon. No turbo motors here, that's Fast and Furious crap there.
Well That really depends on how it was built. Compression, what type of rods and pistons.. Remember.. Spoon can build turbo motors just as well as they can build NA motors. Im sure theyll build you whatever you want as long as your paying..
Either way tho.. Itll be quality for sure..
lol.. man.. NA only for Spoon.
http://www.spoonsports.com/index2.html
http://www.spoonsports.com/engine1.html for engines
We are talking insanely precise, high compression, extreme output B-series motors from Spoon. No turbo motors here, that's Fast and Furious crap there.
Racing Rice
12-02-2001, 11:30 AM
Originally posted by Racing Rice
Well That really depends on how it was built. Compression, what type of rods and pistons.. Remember.. Spoon can build turbo motors just as well as they can build NA motors. Im sure theyll build you whatever you want as long as your paying..
Either way tho.. Itll be quality for sure..
First of all let me apologize for this post. I was doing a couple things at the same time, and it didnt come out the way it was ment to. It was a truely stupid sounding post.
Im very aware of what Spoon does and I appretiate the correction.
What I actually ment to say was...
No you cant put a turbo on a high compression, high revving NA Spoon motor, but Spoon designs and builds motors. Im sure if you went to Spoon with a large amount of cash and asked them to design a blueprinted and balanced, reliable motor that would handle a large amount of boost safely, they would probably do it for the right price. I some how doubt that if the price was right they would turn you down, but I could be wrong. I no way did I mean that you could order a NA Spoon motor and bolt a turbo onto it.
Im very sorry for the mix up.
Well That really depends on how it was built. Compression, what type of rods and pistons.. Remember.. Spoon can build turbo motors just as well as they can build NA motors. Im sure theyll build you whatever you want as long as your paying..
Either way tho.. Itll be quality for sure..
First of all let me apologize for this post. I was doing a couple things at the same time, and it didnt come out the way it was ment to. It was a truely stupid sounding post.
Im very aware of what Spoon does and I appretiate the correction.
What I actually ment to say was...
No you cant put a turbo on a high compression, high revving NA Spoon motor, but Spoon designs and builds motors. Im sure if you went to Spoon with a large amount of cash and asked them to design a blueprinted and balanced, reliable motor that would handle a large amount of boost safely, they would probably do it for the right price. I some how doubt that if the price was right they would turn you down, but I could be wrong. I no way did I mean that you could order a NA Spoon motor and bolt a turbo onto it.
Im very sorry for the mix up.
VTEC_boi
12-02-2001, 12:17 PM
Originally posted by Racing Rice
First of all let me apologize for this post. I was doing a couple things at the same time, and it didnt come out the way it was ment to. It was a truely stupid sounding post.
Im very aware of what Spoon does and I appretiate the correction.
What I actually ment to say was...
No you cant put a turbo on a high compression, high revving NA Spoon motor, but Spoon designs and builds motors. Im sure if you went to Spoon with a large amount of cash and asked them to design a blueprinted and balanced, reliable motor that would handle a large amount of boost safely, they would probably do it for the right price. I some how doubt that if the price was right they would turn you down, but I could be wrong. I no way did I mean that you could order a NA Spoon motor and bolt a turbo onto it.
Im very sorry for the mix up.
it's all good :thumbsup:
Of course, with enough $$ you can do anything. But, I'd rather have Signal build me a RB26DETT instead :D
First of all let me apologize for this post. I was doing a couple things at the same time, and it didnt come out the way it was ment to. It was a truely stupid sounding post.
Im very aware of what Spoon does and I appretiate the correction.
What I actually ment to say was...
No you cant put a turbo on a high compression, high revving NA Spoon motor, but Spoon designs and builds motors. Im sure if you went to Spoon with a large amount of cash and asked them to design a blueprinted and balanced, reliable motor that would handle a large amount of boost safely, they would probably do it for the right price. I some how doubt that if the price was right they would turn you down, but I could be wrong. I no way did I mean that you could order a NA Spoon motor and bolt a turbo onto it.
Im very sorry for the mix up.
it's all good :thumbsup:
Of course, with enough $$ you can do anything. But, I'd rather have Signal build me a RB26DETT instead :D
blatch
12-02-2001, 12:57 PM
ok, i said BUILD. but whatever!
VTEC_boi
12-02-2001, 01:05 PM
Originally posted by blatch
ok, i said BUILD. but whatever!
No you didn't
You said:
Originally posted by blatch
How much horsepower/torque could i get from a turbo'd spoonsports b18c5 enigne?
hehe. Just wanted to pop this forum's cherry.
ok, i said BUILD. but whatever!
No you didn't
You said:
Originally posted by blatch
How much horsepower/torque could i get from a turbo'd spoonsports b18c5 enigne?
hehe. Just wanted to pop this forum's cherry.
kris
12-03-2001, 04:36 AM
Originally posted by VTEC_boi
No you didn't
You said:
:hehe:
No you didn't
You said:
:hehe:
Racing Rice
12-03-2001, 08:11 AM
Originally posted by VTEC_boi
it's all good :thumbsup:
Of course, with enough $$ you can do anything. But, I'd rather have Signal build me a RB26DETT instead :D
Yeah.. I dont think Id go to Spoon to build me a Turbo motor either, Now an NA motor, for sure, but Id prefer to have someone that works with Turbo all day long too..:D
it's all good :thumbsup:
Of course, with enough $$ you can do anything. But, I'd rather have Signal build me a RB26DETT instead :D
Yeah.. I dont think Id go to Spoon to build me a Turbo motor either, Now an NA motor, for sure, but Id prefer to have someone that works with Turbo all day long too..:D
drift
12-03-2001, 12:56 PM
look to JG Engine Dynamics for turbo applications.
spy54
12-05-2001, 11:05 PM
yeai thought the spoon engines had high compression so a turbo would be retarded
madtownhonda
12-06-2001, 11:24 PM
spoon engines are a waste of money...if you want to turbo a motor, get the b18b...spoon engines are built to race specs...basically, you can't daily drive a spoon engine....it won't last long....you can build a better motor for half the price
spy54
12-10-2001, 02:17 AM
vtec boi how you know abotu signal i was gonna head over there and see if they would build me a zc engine for a crx one of there offices is liek 15 minutes from my house:D :D
VTEC_boi
12-11-2001, 04:07 PM
Originally posted by spy54
vtec boi how you know abotu signal i was gonna head over there and see if they would build me a zc engine for a crx one of there offices is liek 15 minutes from my house:D :D
Signal is a renowned Japanese tuner - they have 2 chop top 9-sec. Civics, Skylines galore (yumm....), as well as many drift Silvias/180SXs. Signal is freakin' famous man! And, they just now opened up shop in the U.S.
vtec boi how you know abotu signal i was gonna head over there and see if they would build me a zc engine for a crx one of there offices is liek 15 minutes from my house:D :D
Signal is a renowned Japanese tuner - they have 2 chop top 9-sec. Civics, Skylines galore (yumm....), as well as many drift Silvias/180SXs. Signal is freakin' famous man! And, they just now opened up shop in the U.S.
Automotive Network, Inc., Copyright ©2026