Duplicolor has the squirts

I have a can of Duplicolor that's squirting a stream of paint, instead of the nice vertical spray I've had before. I tried wiping off the nozzle, and I even swaped out the nozzle for another one from a can that worked fine.

What's the deal? :dunno:

It has happened to me as well; I had to buy another can of paint.That was NOT coolness! :shakehead

Try warmning it up in a pan of hot water, this will increase the pressure and it may spray better. Good luck

It was doing the same thing hot or cold.

I poked my Xacto in the hole to see if it was plugged, maybe, and now it sprays in an "L" pattern. Not helpful. :rolleyes: I'll take it and exchange it tomorrow...

It was doing the same thing hot or cold.

I poked my Xacto in the hole to see if it was plugged, maybe, and now it sprays in an "L" pattern. Not helpful. :rolleyes: I'll take it and exchange it tomorrow...that happens to me alot, usually its just the nozzle isnt press down all the way, meaning take the nozzle off and then push down on it really hard when reattaching it, usually it work, if it donw, then i dont no wat to tell u HTH


Josh