b16b
z5ctz
08-26-2003, 04:41 PM
what all can you do to a b16b to get more power while keeping it n/a
tia.
tia.
z5ctz
08-26-2003, 04:56 PM
would it be cheaper and better to n/a a ls/vtec or b16b. which would have more hp in the end and which has better support.
projectsilvia97
08-26-2003, 05:42 PM
if you wanna go n/a, i suggest you not go with those engines. the ls/vtec is mostly for the turbo application, since of it's taller gears. a b20 vtec is a good choice for an n/a. that or a b18c5. those would be one of my choices.
B16EJ1
08-27-2003, 01:54 AM
if you wanna go n/a, i suggest you not go with those engines. the ls/vtec is mostly for the turbo application, since of it's taller gears. a b20 vtec is a good choice for an n/a. that or a b18c5. those would be one of my choices.
Actually an LS/VTEC is a great motor for NA. The hp/trq that it produces is amazing. Yes the longer gear ratios are best for turbo applications but that applies to the tranny and not to the motor itself. An LS/VTEC w/ a 98 spec ITR tranny is a deadly combination.
If you have a B16B, stick with it. There are stroker kits and aftermarket cams that still increase hp and trq not to mention ways to bump compression.
Actually an LS/VTEC is a great motor for NA. The hp/trq that it produces is amazing. Yes the longer gear ratios are best for turbo applications but that applies to the tranny and not to the motor itself. An LS/VTEC w/ a 98 spec ITR tranny is a deadly combination.
If you have a B16B, stick with it. There are stroker kits and aftermarket cams that still increase hp and trq not to mention ways to bump compression.
Ricochet
08-27-2003, 10:17 AM
what all can you do to a b16b to get more power while keeping it n/a
tia.
I want to do the same. I've freed about 10hp with an intake and exhaust but that's not enough... I'm content with it stock but if there are any worthwhile parts then I'm all for it.
tia.
I want to do the same. I've freed about 10hp with an intake and exhaust but that's not enough... I'm content with it stock but if there are any worthwhile parts then I'm all for it.
crxlvr
08-27-2003, 11:01 AM
get a set of equal lentgh header, maybe upgrade the cams/cam gears, and get a fuel and ignition upgrade.
jcrx
08-27-2003, 11:12 AM
You can get THIS (http://www.modacar.com/products/Acura/Integra/MODAENK/)
boosted331
08-27-2003, 03:07 PM
if you wanna go n/a, i suggest you not go with those engines. the ls/vtec is mostly for the turbo application, since of it's taller gears. a b20 vtec is a good choice for an n/a. that or a b18c5. those would be one of my choices.
lol, you sure know what you're talking about. Don't get the B18B for N/A because it has long gears, but get on the B20 train which has the exact same tranny! woo woo!
If you have a B16B, keep it. If you havn't bought a swap yet, a B16B is a waste of money. GSR motor with a portflow head, coated CTR pistons, cams, full exhaust and hondata will make a ton of N/A power and cost less than the B16b.
lol, you sure know what you're talking about. Don't get the B18B for N/A because it has long gears, but get on the B20 train which has the exact same tranny! woo woo!
If you have a B16B, keep it. If you havn't bought a swap yet, a B16B is a waste of money. GSR motor with a portflow head, coated CTR pistons, cams, full exhaust and hondata will make a ton of N/A power and cost less than the B16b.
Ricochet
08-27-2003, 03:41 PM
Yeah but then there's the installation time, dynotuning etc... where a B16B is already tuned to near perfection from the factory. I bought the "packaged deal" and can live without the little extra power a hooked up GSR could provide. I'm not saying either one is right or wrong, just a matter of if you know what your doing or not. I'm not a mechanic, and hooking up a GSR engine by paying a shop to do it all would way outcost a B16B.
z5ctz
08-27-2003, 04:13 PM
does anyone know where i can find a site that is dedicaded to this b20 because i would like to find out more.
tia
tia
projectsilvia97
08-27-2003, 07:05 PM
www.b20vtec.com
or just type in b20vtec at google. that works also
or just type in b20vtec at google. that works also
z5ctz
08-27-2003, 07:15 PM
does anyone know of anymore
tia.
tia.
z5ctz
08-28-2003, 07:06 PM
does no one else know any sites. Well i tryed looking for some on google but couldnt find anything about b20.
Ricochet
08-29-2003, 08:42 AM
does no one else know any sites. Well i tryed looking for some on google but couldnt find anything about b20.
Obviously not because nobody replied.
Obviously not because nobody replied.
Automotive Network, Inc., Copyright ©2026