b16a1

getting my b16a1 swap soon and its commin with the axles, tranny, motor, ecu, and place racing mounts..pretty much everything for 1400 shipped..now all i need are shiflinkage and a sub harness..anyone got those for selling....im i missing something on this swap?..ok will the stock b16 axles fit on my si hb? will my stock cables like clutch and gas cables fit on this b16a1..and since the motor is out what should i replace since its not on the car yet?..

Water pump and timing belt are the things you must replace when the engine is out. You need the axles from a 91 Integra (DOHC version of course). Clutch cable should fit, and the gas cable will fit with a little modification.

For the throttle cable. You'll either need a place racing throttle bracket (17 bucks)or get the 90-93 integra throttle cable(30 bucks). I'm using the place racing bracket. The stock b16a axles will fit if they gave u the intermediate shaft with it. IF they dont they i think only one side is good but the driver side might need one from the 86-89 integs. Go to www.hasport.com Im not too sure about all that matchin stuff.

hey im planning to get my b16 swap done at a shop. should i take out the d before i go to the shop or just keep the d inside?

hey im planning to get my b16 swap done at a shop. should i take out the d before i go to the shop or just keep the d inside?



If they'll lower the price yeh take it out. If not, fuck it let them do it.

but wouldnt it be better cuz i will keep the engine and could sell parts. if they take it out, they would keep the engine. if i do take it out is there any stuff there going to use?

but wouldnt it be better cuz i will keep the engine and could sell parts. if they take it out, they would keep the engine. if i do take it out is there any stuff there going to use?

Dude..as much as I hate to say it, The 1.5 isn't going to be worth the hassle of removing the parts to attempt to sell them. Most of the parts are not compatible with even the 1.6L d-series motor. That little motor pulled your car around for a long time, albeit not very fast...now be strong and let the shop toss it in their dumpster where it belongs :( :biggrin:

uhhh back up motor (if you got the room)

Dude..as much as I hate to say it, The 1.5 isn't going to be worth the hassle of removing the parts to attempt to sell them. Most of the parts are not compatible with even the 1.6L d-series motor. That little motor pulled your car around for a long time, albeit not very fast...now be strong and let the shop toss it in their dumpster where it belongs :( :biggrin:


I agree. I dont think anyone wants to go 1.5. Throw it away. :smile:

I gave my 1.5 to a mechanic friend of mine, and now I get cheap work done on my car all the time. :)

I gave my 1.5 to a mechanic friend of mine, and now I get cheap work done on my car all the time. :)



LOL :p :screwy: