Extreme FB too big. PLEASE HELP

OK, this had to happen at the last possible time before i left for college. So, my rear bumber and side skirts are on and fit fine. But the Extreme front bumber is messed up. If it put it where it should be on the right side then it sticks out 3-4 inches on the left (vice versa) Also if pushed flushed it goes into the wheel well about 2 inches. The hole cut for the bumper lenses are 4 inches too long. Its for the 88, so i am thinking someone just put a gen. up bumber in there. Any help would be GREATLTY appreciated.

can u send it back :confused:

OK, this had to happen at the last possible time before i left for college. So, my rear bumber and side skirts are on and fit fine. But the Extreme front bumber is messed up. If it put it where it should be on the right side then it sticks out 3-4 inches on the left (vice versa) Also if pushed flushed it goes into the wheel well about 2 inches. The hole cut for the bumper lenses are 4 inches too long. Its for the 88, so i am thinking someone just put a gen. up bumber in there. Any help would be GREATLTY appreciated.


Sure sounds like you got the wrong bumper... Doesn't sound like something that's going to be easy to fix at all...

I am currently talking with VIS and they said i need to be talking to Nick from the 4g4dstore/Import Nights. Either way it sucks since i will have the stock bumber on till i get it worked out.

I am currently talking with VIS and they said i need to be talking to Nick from the 4g4dstore/Import Nights. Either way it sucks since i will have the stock bumber on till i get it worked out.
That sounds about right to me.. You have to center it so you have equal length on both ends, and your good to go. If it's fiberglass that is considured a good fit. Now if it's urathane you should get a new one.

If you read your invoice, or disclaimer on the site it'll say. And I quote this.
"All aftermarket fiberglass products MUST be installed by a pro. If they can not get it to fit, we will gladly replace it"
Or it will sound sumthing along those lines.

Fiberglass takes alot of custom work to get it to fit exactly. Shit mine took 5 grand to make it flow perfect.
I know this because I retail out body kits, and hear these problems daily.

Take it to a body shop and see what they can do. If they say no way, then the seller should replace it.

Good Luck man.

That sounds about right to me.. You have to center it so you have equal length on both ends, and your good to go. If it's fiberglass that is considured a good fit. Now if it's urathane you should get a new one.

If you read your invoice, or disclaimer on the site it'll say. And I quote this.
"All aftermarket fiberglass products MUST be installed by a pro. If they can not get it to fit, we will gladly replace it"
Or it will sound sumthing along those lines.

Fiberglass takes alot of custom work to get it to fit exactly. Shit mine took 5 grand to make it flow perfect.
I know this because I retail out body kits, and hear these problems daily.

Take it to a body shop and see what they can do. If they say no way, then the seller should replace it.

Good Luck man.

5 grand for what?? to fit yer bumper ?? :eek7:

5 grand for what?? to fit yer bumper ?? :eek7:

Bodywork/Paint