Newbie Trying to wire amp - PLZ help!

Hello Everybody.

Im new here, so please give us a warm welcome.

I recently bought a Toyota Celica 1980 model. And it included an amp sterio and everything else.

Now I was just wondering how to actually wire up the amplifier.

It needs 3 power wires to work for some reason.

one says "Bat" one says "Rem" and the other says something else.

Please give me some idea on what they mean, and how to wire this up. Any help at all will be greatly apprieciated.

THE ONE THAT SAYS BATT GOES DIRECTLY TO YOUR BATTERY. YOU CAN GO TO ANY CAR AUDIO SHOP AND GET SOME POWER WIRE. YOU MIGHT NEED TO DO SOME DRILLING THROUGH YOUR FIREWALL UNLESS THERE IS ONE THERE ALREADY. THE ONE THAT SAYS REM IS YOUR REMOTE WIRE. THIS TELLS YOUR AMP TO TURN ON WHEN YOU TURN YOUR HEAD UNIT ON. IF YOU ALREADY HAVE AN AFTERMARKET HEAD UNIT IN YOUR CAR, PULL IT OUT AND LOOK AT THE WIRES THAT ARE IN THE BACK. THER SHOULD BE A BLUE WIRE THAT SAYS THE SAME. IF NOT, YOU CAN ALWAYS USE A MULTIMETER TO FIND A REMOTE. IF YOU ARE GOING TO BUY RCA'S FOR YOUR SIGNAL, LOOK FOR SOME THAT HAVE A REMOTE WIRE CONVENIENTLY IN THEM. THIS SAVES TIME AND LOOKS CLEAN. AS FOR THE BLACK WIRE, DRILL A HOLE IN ANYWHERE IN THE CHASES AND USE A SCREW TO GROUND THAT WIRE.JUST MAKE SURE YOU DONT PUT A WHOLE IN YOUR GAS TANK.:screwy:WHAT KIND OF AMP IS IT?