94 LT1 Mods

I just bought a 94 Z-28 with the LT1 and a 6 speed, i was wonderin what kind of mods i should put on first, i was thinkin K&N cold air intake, corsa exhaust + headers, and to chip it, vut is there anything else i could possibly do?

wow thats a nice car ,,, if u dont mind me asking
how much did u pay and how mamny miles on the car

i payed 12,000, it came with eagle alloy rims, a b&M Shifter, plus some other little things, and it has 128,000 kms, whatever that is in miles

and thats 12,000 canadian, so, aboot 8500 to 9000 american i think

Crane Gold 1.6 rockers and LT4 valve springs.

fastchip.com stage II chip.

3.73 or 4.11 gears.

Or heads and cam.

throttle body, 3" exhaust, maf, dual friction clutch, aluminum drive shaft, lighter flywheel, adjustable fuel pressure regulator, fuel injectors, etc...etc... just be creative

A few things ;
CAI, exhaust , free mods (TB bypass, MAF screen removal), rear gears to either 3.73 or 4.10 . Later down the road, 383, heads/cam, headers, etc. With the free mods, CAI & 3" exhaust, you should be in the 13's.

You can't "chip" a 94 , because its an OBD1 car and you'd need to get it programmed. 93 was the last year for chips. A bigger TB won't do anything for you unless you have some serious mods. You can get an AFPR, but you will need to get the computer programmed , otherwise the computer will compensate for it.

A good board to find out more isat www.camaroz28.com

Sorry I meant get stage II programming for your 94 car from www.fastchip.com You have to send him your PCM.

An adjustable fuel pressure regulator won't do anything on a a 94+ car because the PCM will reset the injector pulse width to compensate.

Throttlebody gives you 4hp unless you do a cam.

Check www.ws6.com for dyno tests of different mods.