F/s B18b1
T-Mo
08-14-2003, 10:46 PM
I have a B18B1 for sale. It was going in my '91civic hb, but had some unexpected problems with my other car (Prelude)that needs the attention (because it is my daily driver). The engine is out of a '96 Teg LS. It includes the head, which has been ported, the block, which has been bored .030. I have new pistons, a new never opened head set and bottom (block) set, and new oil pan gasket. It has the intake and exhaust manifold and the wiring harness. For pics go to my homepage and look in the photo album If you have any ???'s email me @
[email protected] (please leave where you saw this ad at) Make me an offer
http://home.bellsouth.net/p/pwp-tmo
The head is blown on my civic now and I was planning on doing a swap with the B18, but $hit keeps happening. I have a head waiting to be worked and put on that I bought for $40 (for whole engine-excluding crank) So that will hold me over until I can focus on the civic a little more.
[email protected] (please leave where you saw this ad at) Make me an offer
http://home.bellsouth.net/p/pwp-tmo
The head is blown on my civic now and I was planning on doing a swap with the B18, but $hit keeps happening. I have a head waiting to be worked and put on that I bought for $40 (for whole engine-excluding crank) So that will hold me over until I can focus on the civic a little more.
T-Mo
08-15-2003, 11:02 AM
This is only the engine. No tranny, no axles, no mounts, no ecu.
91civicDXdude
08-15-2003, 04:15 PM
Are you located in atlanta, GA?
and its my understanding that the engine is ready to be put back together but is currently in pieces?
and its my understanding that the engine is ready to be put back together but is currently in pieces?
Problem_Si
08-16-2003, 06:19 AM
not to hijack your thread t-mo....
but to anyone who is interested...i have a chipped 5speed pr4 obd-0 ecu for the b18a. pm me if interested.
but to anyone who is interested...i have a chipped 5speed pr4 obd-0 ecu for the b18a. pm me if interested.
Kunundrum
08-16-2003, 06:38 AM
would you seperate the head from the block ?
what CR are the Pistons ?
what CR are the Pistons ?
T-Mo
08-16-2003, 02:20 PM
Are you located in atlanta, GA?
and its my understanding that the engine is ready to be put back together but is currently in pieces?
Yes I am in Atlanta, and yes the engine is ready to be put back together. All the pcs are here though.
and its my understanding that the engine is ready to be put back together but is currently in pieces?
Yes I am in Atlanta, and yes the engine is ready to be put back together. All the pcs are here though.
T-Mo
08-16-2003, 02:24 PM
would you seperate the head from the block ?
what CR are the Pistons ?
Depending on how much you want to give me for the head whether I will seperate it or not. What is "CR"? I am lame help me out.
what CR are the Pistons ?
Depending on how much you want to give me for the head whether I will seperate it or not. What is "CR"? I am lame help me out.
Kunundrum
08-16-2003, 10:35 PM
i'm actualy more interested in the Block,
CR = Compression Ratio
CR = Compression Ratio
T-Mo
08-17-2003, 07:56 PM
The price of the engine goes like this: the head is $350 and the block is $400. So all together $750. These prices are negotiable. Holla at me ya'll.
Kunundrum: As far as CP, I don't know. I don't know how to tell or test it. What I do know is that the block was bored .030.
Kunundrum: As far as CP, I don't know. I don't know how to tell or test it. What I do know is that the block was bored .030.
Automotive Network, Inc., Copyright ©2026