Where can I buy a new turbo compressor wheel?
ty423
11-28-2001, 01:20 AM
I posted this earlier in a different thread:
Maybe you guys can help me out some more here. Yesterday I sent in my turbo to be rebuilt with a new compressor wheel. Today I got a call saying they can't do it. The reason? The compressor wheel is not available here in the states (supposedly). I bought this turbo used with the manifold and heatshield. The guy I bought it from said it was from a Nissan Bluebird. The turbo place thought that it was a typical Z32 turbo but looked up the turbo number badge and it matches no car in the Garrett guide. Where do you think I can get a T25 A/R 80 wheel? Turbo model number 466075-2 Garrett. The place I went to is www.turbocity.com
Maybe you guys can help me out some more here. Yesterday I sent in my turbo to be rebuilt with a new compressor wheel. Today I got a call saying they can't do it. The reason? The compressor wheel is not available here in the states (supposedly). I bought this turbo used with the manifold and heatshield. The guy I bought it from said it was from a Nissan Bluebird. The turbo place thought that it was a typical Z32 turbo but looked up the turbo number badge and it matches no car in the Garrett guide. Where do you think I can get a T25 A/R 80 wheel? Turbo model number 466075-2 Garrett. The place I went to is www.turbocity.com
lloyd_nickens
11-28-2001, 08:52 AM
turbonetics should be abe to do it.
G-Forces
11-28-2001, 09:12 AM
I don't know man, I'm a dunce when it comes to the gritty details of turbos.
APEXSER
11-28-2001, 01:42 PM
Originally posted by ty423
I posted this earlier in a different thread:
Maybe you guys can help me out some more here. Yesterday I sent in my turbo to be rebuilt with a new compressor wheel. Today I got a call saying they can't do it. The reason? The compressor wheel is not available here in the states (supposedly). I bought this turbo used with the manifold and heatshield. The guy I bought it from said it was from a Nissan Bluebird. The turbo place thought that it was a typical Z32 turbo but looked up the turbo number badge and it matches no car in the Garrett guide. Where do you think I can get a T25 A/R 80 wheel? Turbo model number 466075-2 Garrett. The place I went to is www.turbocity.com
If you don't mind waiting, I can get the turbo rebuilt for you! You can send it to me and I can get it rebuilt by my turbo guy! A full rebuild is right around $225.00. If it only needs a compressor wheel and balancing, I am sure it will be less! Let me know!
I posted this earlier in a different thread:
Maybe you guys can help me out some more here. Yesterday I sent in my turbo to be rebuilt with a new compressor wheel. Today I got a call saying they can't do it. The reason? The compressor wheel is not available here in the states (supposedly). I bought this turbo used with the manifold and heatshield. The guy I bought it from said it was from a Nissan Bluebird. The turbo place thought that it was a typical Z32 turbo but looked up the turbo number badge and it matches no car in the Garrett guide. Where do you think I can get a T25 A/R 80 wheel? Turbo model number 466075-2 Garrett. The place I went to is www.turbocity.com
If you don't mind waiting, I can get the turbo rebuilt for you! You can send it to me and I can get it rebuilt by my turbo guy! A full rebuild is right around $225.00. If it only needs a compressor wheel and balancing, I am sure it will be less! Let me know!
ty423
11-28-2001, 05:18 PM
Well the place I sent it too tore it apart and is in parts. He said I do need to rebuild the bearings are bad. I need to rebuild bearings and seals and new compressor wheel as well as balancing everything. Are you sure you guys can get this compressor wheel? I have already posted the turbo number and trim. Let me know. and thanks again.
Tony
Tony
APEXSER
11-28-2001, 06:09 PM
It is a factory Bluebird T25 correct? I can get it rebuilt! I have gotten 5+ T25's rebuilt without any problems.
G-Forces
11-28-2001, 06:43 PM
Tony: Louis is da man! Did you notice his sig? :eek: I've ordered parts from him before and never had any problems.
AznVirus
11-28-2001, 06:59 PM
so rebuilding a turbo only cost around $200-300 right? if so, damn i might as well, once a turbo is blown, can you still rebuild it?
APEXSER
11-28-2001, 07:04 PM
Originally posted by AznVirus
so rebuilding a turbo only cost around $200-300 right? if so, damn i might as well, once a turbo is blown, can you still rebuild it?
It depends on what size and type of turbo you have! Generally, the T25 & T28 are about $225.00 to rebuild. If the center cartridge is bad, then the price goes up! Most of thr time, the turbos just need new seals and need to be balanced!
so rebuilding a turbo only cost around $200-300 right? if so, damn i might as well, once a turbo is blown, can you still rebuild it?
It depends on what size and type of turbo you have! Generally, the T25 & T28 are about $225.00 to rebuild. If the center cartridge is bad, then the price goes up! Most of thr time, the turbos just need new seals and need to be balanced!
ty423
11-29-2001, 12:15 AM
Louis thanks for letting me know. Turbonetics is going to call me tomorrow and give me a quote. I will get back to you if I want to get it done through you. How long would it take once you received my turbo? Plus I already have the turbo in pieces. Would that reduce price at all? Also, how much would it be just for the compressor wheel? Sorry about all the questions but I want to know before I make a move. Hope you understand.
APEXSER
11-29-2001, 09:42 AM
Originally posted by ty423
Louis thanks for letting me know. Turbonetics is going to call me tomorrow and give me a quote. I will get back to you if I want to get it done through you. How long would it take once you received my turbo? Plus I already have the turbo in pieces. Would that reduce price at all? Also, how much would it be just for the compressor wheel? Sorry about all the questions but I want to know before I make a move. Hope you understand.
As soon as you ship it I will take it to my turbo guy! He will know exactly what is needed in 1-2 days and he will give me and estimate! I then give you the estimate and you decide whether you want to do it or not! Total rebuild once I have it should only take 2-3 days unless he needs to order parts!
Louis thanks for letting me know. Turbonetics is going to call me tomorrow and give me a quote. I will get back to you if I want to get it done through you. How long would it take once you received my turbo? Plus I already have the turbo in pieces. Would that reduce price at all? Also, how much would it be just for the compressor wheel? Sorry about all the questions but I want to know before I make a move. Hope you understand.
As soon as you ship it I will take it to my turbo guy! He will know exactly what is needed in 1-2 days and he will give me and estimate! I then give you the estimate and you decide whether you want to do it or not! Total rebuild once I have it should only take 2-3 days unless he needs to order parts!
Automotive Network, Inc., Copyright ©2025