Wiring

l am new to the board but no new to building vehicles, i have just completed a rebuild on my chevy s10 and i have run into a problem with the wiring. l was wondering if anyone would have a link to a wiring diagram for this year truck.

1987 chevy s10 w/ 2.5 litre motor. standard trans..

Thanks

what type of wiring are you doing... one recommendation is to go into your local stereo installation shop and have them print you up some information reguarding wiring. I got a system in my 96 s10 and the installer printed me up a wiring manual for my car

l am concerned with the wiring within the engine compartment. Each sensor, plug and anything else that may make the engine start and run...

Have you heard of google? or maybe the library? you could always look up a book on the 87' s-10

I have an 86 that i put a 93 motor in. Each sensor has an unique plug that goes to it. If you laid out your harness the way it lays in the truck-you should be able to hook up the plugs to the correct sensors.

I have the diagram I can e-mail you it if you still need it.

Let me know..

First off, did you get the 93 harness and the ECM? Also if you're using the 93 ECM, are you using a 4l60e tranny or the 700r4?