JDm cluster

i need to know what i need to put in a jdm cluster, into my car, (91 DX)

a 90 or 91 JDM cluster they will hook right up to the usdm harness and they bolt in the same also.

are you putting in the SiR cluster or the standard cluster?

you know unless you wnat to get speeding tickets b-cause you can only tell how many km/hour your going get a edm (european domestic) you know one from england or brittan whatever.

whats the diff? i know its a stupid question but ive never seen them before

in britain we use mph not kmh so it will be fine, anyway the speedo says both here

This is what it looks like. http://www.imagestation.com/picture/sraid37/p677b81bbe11e65ac1a1616933a35e75e/fd1d5009.jpg

Reading the speedo and converting it to mph is a piece of cake...just multiply by .06, you get used to it after a while. For example, 100 kmh is 60 mph.

EDM clusters have cable driven speedo where as the JDM units have electronic speedo. AFAIK it's the EDM unit that will hook up to your harness and not the JDM siR one.

What you need is an EE8 speedo cluster and not a JDM EF8 cluster.

JDM EF8 Speedo....
http://www.cr-x.org/home/differences/91jdmsirdash.jpg]


Rear of a JDM EF8 cluster.....
http://www.cyberrexer.20m.com/slide_shows/Miscellaneous_Slide_Show/Speedo_Face3.JPG


EDM EE8......
http://www.cr-x.org/home/differences/91sirdash.jpg

I put the JDM SiR cluster on my ZC with a speedo cable. I converted it to eletronic up behind the cluster. it works perfectly Wasn't easy but got it done.