Rs? Gs?

Whats the difference between the RS and GS?? can someone please tell me.

rs= really sucky
gs=generly sucky
lolz
naa the gs i think has better features then the rs.. power seats, sun roof..ect.. the rs is like the base model..

gsx\gs-t joonz EclIpsE...

1

hahahahahaha thanx alot, i have been wondering that for a while.

and if i got a GS, how much do u think a turbo kit would be, for that car?

about 3-4g's but you still couldn't boost as much as a gsx\gst i say just spend the extra $$ and get a gsx\gst.. it's worth it..

1

yea dont get me wrong but there slow. i love the cars and all but they are slow.when my little 91 1.6 hatch si was stock it smoked some rs.a 1.6 SOHC.with an intake.and the rs had a exhaust.so.there pretty.but need to be faster.

Check out Hahn 20g turbo kits. It's a good choice for the 420A.

Originally posted by 97ESi
Check out Hahn 20g turbo kits. It's a good choice for the 420A.

I don't really understand the concept of putting a 20G on a engine that cannot handle even 1/2 the psi a 20G can put out. The 20G is a 450 Hp turbo. The 420A could never hope to make more than 300 , and thats giving it a LOT . A Garret T25 is plenty for a high compression motor such as the 420A , and it will improve low-end torque , since it spools up at MUCH lower rpm's than a 20G ever would. A 20G kit is a major ripoff for a 420A , don't waste your money. If the exhaust manifold can be purchased seperately , I'd do that , and then get a T25 kit , which should bolt up to the exhaust mani......:smile:

Companies that sell turbo kits for non-turbo cars rip people off by selling them on a huge, unecessary turbo, because they know the poeple buying the kits know jack-shitt about turbos

Never a truer word spoken gentlemen... :wink:

:werd:

1

Originally posted by turbo2nr
:werd:

1
He looks tired. Needs a little BOOST , maybe ?:lol:

He looks tired. Needs a little BOOST , maybe

YES YES GIMMIE BOOST NOW!!
MUHHAHAAH

BOOST = :biggrin: :iceslolan

1

RS = 1.8 liter
GS = 2.0 liter
GS on a spyder = 2.4 liter

Originally posted by Twyzz
RS = 1.8 liter


In a 2G? Since when?

Originally posted by Twyzz
RS = 1.8 liter
GS = 2.0 liter
GS on a spyder = 2.4 liter


RS is not a 1.8 on the 2G. The RS has the 420A. And for the uneducated , the Spyder also has the 2.0 (4G63T) turbo available.

Lets break it down:

RS = 420A
GS = 420A
GST = 4G63 T
Spyder GS = 2.4 (4G64)
Spyder GS-T = 4G63T
GSX = 4G63T

ALL non-turbo's in the 2G style got the 420A , the ONLY exception being the spyder.

Before you start spouting statistics , especially when the rest of us know better , and before you embarass yourself with incorrect knowledge , I would suggest a visit to your local DSM club's website and look in the 1000 AAQ's ............... It'll save you further embarassment from people like me having to correct you , and then doing this........:thefinger

The 1.8L SOHC was only in the 1G RS. The 2G RS has the same 420A 2.0 L engine as the GS... The difference in the two is, options, and suspension. The GS has sway bars and such, which the RS lacks. The GS handles much better.

I have a 1.8L GS...... not 1.8 RS

RS = Really Shitty

GS = Generally Shitty


:evillol:

I don't really understand the concept of putting a 20G on a engine that cannot handle even 1/2 the psi a 20G can put out. The 20G is a 450 Hp turbo. The 420A could never hope to make more than 300 , and thats giving it a LOT . A Garret T25 is plenty for a high compression motor such as the 420A , and it will improve low-end torque , since it spools up at MUCH lower rpm's than a 20G ever would. A 20G kit is a major ripoff for a 420A , don't waste your money. If the exhaust manifold can be purchased seperately , I'd do that , and then get a T25 kit , which should bolt up to the exhaust mani......:smile:

I have an RS with a TD06h 20g turbo on it :iceslolan and i am running about 21psi on a good day with race gas... and i'm pushing around 325-350hp (havent had the chance to dyno it since the engine has been done so its just an estimate) although everything in my engine and on the engine has been replaced! so the concept of putting a 20g on a 420a motor is that you better be prepared to replace everthing on the motor or your gunna blow the piss out of it... and you'll have terrible turbo lag if your only running it at about 7-10psi!!! plus let alone its just plain stupid.

I have an RS with a TD06h 20g turbo on it :iceslolan and i am running about 21psi on a good day with race gas... and i'm pushing around 325-350hp (havent had the chance to dyno it since the engine has been done so its just an estimate) although everything in my engine and on the engine has been replaced! so the concept of putting a 20g on a 420a motor is that you better be prepared to replace everthing on the motor or your gunna blow the piss out of it... and you'll have terrible turbo lag if your only running it at about 7-10psi!!! plus let alone its just plain stupid.


Why did you get such a big turbo? You can run 21psi on a smaller, and cheaper turbo.

Why did you get such a big turbo? You can run 21psi on a smaller, and cheaper turbo.

cause i got the turbo as a package price along with injectors, fuel pump FMIC, IC piping, WG, BOV, and oil lines from a friend of my families and i couldnt pass it up, it only costed me $650 plus i did some work on his stereo for him, but i was thinkin of selling the turbo and then buying a big 16 but i thought i would keep it incase i wanted to run 25-30psi later on like in a year or 2. it works fine right now, it doesnt spool like a 16g would but it does the job, plus it looks cool and everyone is amazed that it is on a 420a :evillol:

My RS is a 2.0 liter same 420A motor thats in a GS...

If i wanted to run a turbo to my car what would be the best one?

depends on what you plan on running for boost, i would probably suggest the T25 or the 14b if your gunna stick with stock internals which you wouldnt want to run anymore than 10psi... if your gunna replace your internals, i would probably go with the T28 or the 16g, cause they spool pretty quickly and they can produce good boost with the right mods done to the engine.

Where could i get one of the ones without purchusing internal parts and how much would it cost me. would it be easy to install too?

you could get the turbo off of ebay fairly cheap, probably about 100-200 for a 14b or a t25, its not easy to install, you will need new injectors, new fuel pump, MAS, oil lines, SMIC or FMIC, IC piping, turbo exhaust manifold for the 420a, turbo back exhaust, new head bolts, BOV WG, Boost controller (AVC-R is what i would suggest), and a oil pan off of a 4g63 turbo engine... there are some other little things that you will need but thats all i can think of off the top of my head... if you know what you are doing and you know the engine well it will probably take you 3-4 weeks depending on how long you work on it each day, if you work on it all day everyday you could most likly get it done in about a week and a half to 2 weeks. good luck

You can get a reasonable kit from star. It's a t3/t4 hybrid and comes with an intercooler. It will run you about 2800. You can only run about 7 or 8 psi safely though. So you're better off just goin for the gst