Car Wont Start! Please Help

Hi,

I finally fixed my fuel line so it doesnt leak anymore.
But when I crank my car to turn it on it just cranks up like it wants to start but it cant.
I just did an MPFI conversion so maybe this could be the problem?
Im pretty sure I did it right except for the distributer part.
What could be causing this?
I even have it hooked to a jump starter and it wont start just crank.
Does the throttle cable have to be connected for the car to start because mine isnt connected yet.
Please help, school starts monday and I need a ride thanks.

did you swap dizzys and ecus?

It already came with a SI dizzy and I already wired in the SI ECU i bought.

are you getting sparks to the spark plug? if not, it might be that the igniter or the ignition coil is bad.

Yup just checked and all of them have got spark.
I think I may have the wrong order in spark plug wires though.
When you look at the front of the engine does it go 1,2,3,4 from left to right?
Also on the distributor what is correct spark plug order?
Thanks

see the other post you started about it - http://www.automotiveforums.com/vbulletin/t124960.html

*click*