78 Trans Am Project For Sale

I got a suburban and need money to work on that so I'm selling my project cars...

I have a 78 Trans Am..
It has the stock rear-end, all the glass, and it has 400cubic inch engine, that was rebuilt 6000 miles ago, i have the sheet for the cam somewhere, it has edelbrock intake, a quadrajet caburator that was custom modified for the cam, i dont know what the heads or headers are... There is a really nice flowmaster exhaust on this one... The transmission is a TH400....

The other car (the one i intended on using) is an 80 ta, it has t-tops, all the glass, it has 4.56's in the rear-end, but no engine....

I have a brand new Mallory Unite Distributor and a HyFire 6AL ignition module and an accell 50,000 volt drag race coil sititng here for it...

I have new floorpans sititng for it..

A brand new painless systems wiring harness....

I also have a complete set of Autometer Pro-Comp guauges for it...
200mph speedometer
1-10k rpm tach
fuel level
voltage
temp
oil pressure,

I have brand new carpeting sitting here in the box for it

I have all brand new weather stripping for it sitting here in a box.....

a B&M quicksilver console shifter in the box...

A B&M Shift Cable....

A trunk lock mechanism thinggy sititng here...

Um... I'm sure I have more stuff for it i just have to think.......

Both cars have tires and rims on them


I've got about $6000 in all this stuff....


I'll let it all go for $3500 obo.... I may accept partial trades for things that i can use for my suburban or maybe somethig elese i dunno.....

You can either msg me on aim (Bomber166) or give me cell a ring (407-739-5731)

What would you want for just the 78?
What kind of condition is the body in? Interior?
Driveable?
Where do you live?

the 78 has no interior, the entire front end is off of it, its not drivable and I live in Orlando, FL

pics?
how much?

For just the 78 and none of the extra parts except what u need to make the engine work I would say $1500 cause that would include brand new distributor, hyfire 6al, and 50,000 volt acell coil...... I do have the fenders and a front end of some firebird that u could have with it as well, just no hood......


pictures yes.....

I'll have to get back to ya on that i gotta upload them all...

Thats interesting because my best friend has a 77 T/A and he has an extra hood.

For five hundred bucks more i would give u the other body with the hood, and the good fenders, and it has hardley any rust, minus the floors pands (It comes with new ones).... and that body also has t-tops, 4 wheel disc brakes, and 4.56's in the rear

Yeah but then I would need two drivers and 2 trailers, and I really don't want to make 2 trips given that I am about 500 miles away(or something like that).

hmm good point

pics?

I didnt have any pics that you could see the condition its in now... So When i get my camera back later tonight i'll take some in the morning and post htem...

http://car.bomber166.com

These are pics of both cars before i started working on them..... The front end is now completly off the 78 and the 80 now has a complete front end......





I'll try and post pictures of what they look like now tommarow

What kinda stuff do you need for your suburban?
I got lots of engine stuff for SBC.

Well i'm looking for a shortblock 350 to build for it....
Other than that right now i'm just looking for
Headers (Must be able to take my o2 sensors)
A nice set of rims (Something that looks like the Weld Racing Stonecrushers)
Tires (BFG All Terains)
Shocks (Rancho or Explorer Pro-Comp)
An amber/clear light bar (like http://www.strobe-direct.com/images/Products/FullSizeLightBars/9411ha.jpg)
Some really good offroad use lights (Something like http://shop.offroadwarehouse.com/index.php?cat=264&item=dayLongS)
dual exhaust system (w/ 3" piping all around like http://store.summitracing.com/partdetail.asp?part=SUM%2D688350)
A very good winch (Like http://store.summitracing.com/partdetail.asp?part=SPW%2D1917)

thats all i can think of off the top of my head right now... i'm sure there is more...

Anyone????????


I'll trade the 400 in there for a 350....

those things are in some bad shape (but maybe not so bad for what year they are)..... i bet you could make real nice though.....

I could make them really nice, but I dont have the time anymore, i start school on the 25th....

Anyone want any of the parts, the body, the engine, the transmission, anything????????????????


Things I'm looking for that could be trades:

Stock Chevy 454 Engine
Chevy 6.5L Disel Engine

(low miles on either)


Anything elese u have just ask.....

If you are looking to sell the parts, I would buy those gauges from ya. Just let me know if you want to just sell the parts from the pics. I need gauges and shifter.