Ford Tempo Problem
beigecar
07-24-2003, 07:04 PM
My 92 Ford Tempo alwasy shakes to die when it runs while the brake is pressed, i.e. while you backward parking, after pressing the brake for 20 second, it starts shaking and seems to die. But if i stop, and give it some gas, it becomes ok again. Does anyone have any idea for this problem, thank you in advance.
Dan_in_WA
07-28-2003, 11:17 AM
First, do your brake lights work? Ford has a "BOO" switch that won't signal the EEC unless the lights are good. The bulbs are acually the ground path for the circuit. "BOO" stands for Brake On/Off. Can't remember if you're car has this or not.
Try visiting us at www.tempotopaz.com
The site will be back up early this week. It is down for maintenance right now.
The absolute, very first thing to do when troubleshooting these cars is to read any codes stored in the EEC-IV.
Check to make sure your SES light will come on. When you first turn the key, all the dash lights illuminate - and the SES light should work as well. If this is ok, all you'll need is a short jumper wire, and you'll be reading codes. More on this later.
Keep us posted. :smile:
Try visiting us at www.tempotopaz.com
The site will be back up early this week. It is down for maintenance right now.
The absolute, very first thing to do when troubleshooting these cars is to read any codes stored in the EEC-IV.
Check to make sure your SES light will come on. When you first turn the key, all the dash lights illuminate - and the SES light should work as well. If this is ok, all you'll need is a short jumper wire, and you'll be reading codes. More on this later.
Keep us posted. :smile:
Automotive Network, Inc., Copyright ©2025