need help with SC rebuild
'00' GTP
07-16-2003, 09:46 AM
need help with a supercharger rebuild. advice, info, I think that the bearings are out.
pawn
07-16-2003, 12:34 PM
need help with a supercharger rebuild. advice, info, I think that the bearings are out.
You need a rebuild already? Well '00' GTP, i'll keep my eye out and everything, i'm sure there are rebuild kits available. Oh yeah, you still selling those performance chips for the GT's and GTP's?
You need a rebuild already? Well '00' GTP, i'll keep my eye out and everything, i'm sure there are rebuild kits available. Oh yeah, you still selling those performance chips for the GT's and GTP's?
Ripn12s
07-16-2003, 06:07 PM
Is there a lot of play in the pulley???
taking the snout off is really easy and I would suggest using ZZP's http://www.zzperformance.com/zzp/products/eaton_sc_coupler.htm
I've never had to rebuild the blower but have had it off a few times (cam install and swapped a p & p housing). Hopefully its just in the snout and not the rotors themself. It basically breaks into 3 main parts
Snout
Rotors
Housing
That's all I can think of.
Tim
taking the snout off is really easy and I would suggest using ZZP's http://www.zzperformance.com/zzp/products/eaton_sc_coupler.htm
I've never had to rebuild the blower but have had it off a few times (cam install and swapped a p & p housing). Hopefully its just in the snout and not the rotors themself. It basically breaks into 3 main parts
Snout
Rotors
Housing
That's all I can think of.
Tim
Mobiletec
07-16-2003, 09:55 PM
ya But is there anyone that sells rebuild kits. Like the bearings and seals etc. Or any pics of how it`s done?
Ripn12s
07-16-2003, 10:07 PM
I cant remember if there is a gasket between the snout and rotors or not. I remember using RTV gasket maker for one of the seals. Try a search on www.clubgp.com for better directions.
Tim
Tim
'00' GTP
07-17-2003, 08:38 AM
Well I got on Club GP, and found pretty much how to do it, and I also found bearing and seal #'s. I have ordered a coupler, and oil.
I think that the reason that it is going out so soon is because when I was doing a pully swap the end clip got mangled somehow, I think that contributed to the falure, but I am not sure.
I am going to take pictures, and post them when I am done. I am starting the tear-down tomorrow.
Pawn, nice to see you....... yes, I think I could arrange to get you one. or 2, we have kind-of stoped making them, but I know how to do it. so the answer is yes, are you still intrested?:bigthumb:
I think that the reason that it is going out so soon is because when I was doing a pully swap the end clip got mangled somehow, I think that contributed to the falure, but I am not sure.
I am going to take pictures, and post them when I am done. I am starting the tear-down tomorrow.
Pawn, nice to see you....... yes, I think I could arrange to get you one. or 2, we have kind-of stoped making them, but I know how to do it. so the answer is yes, are you still intrested?:bigthumb:
'00' GTP
07-18-2003, 11:51 PM
well I am half-way there, the SC is tore apart, and the bearings are out. I am just waiting on the coupler and the oil, and I will be ready to go
I have lots of pics, I will post when I am done
I have lots of pics, I will post when I am done
'00' GTP
07-24-2003, 02:33 PM
Done, and she runs like a dream........
if any of you want to know how to do it, or what parts to buy let me know, and I will send pictures. it is real east, took me a whole 3 hrs of work. and $90 and I put in a new coupler, and a new snap ring.
if any of you want to know how to do it, or what parts to buy let me know, and I will send pictures. it is real east, took me a whole 3 hrs of work. and $90 and I put in a new coupler, and a new snap ring.
svo2r
10-29-2003, 04:47 PM
Could you give be the part numbers I would need to replace the bearings in mine?
Automotive Network, Inc., Copyright ©2025