Outside or both?

I am juz curious whether you all paint the outside of your body only or you all paint both inside or outside?

I usually just paint the outer surface of the body. ( I assume thats what you mean :confused: )

I just paint the outside, you dont need to spray the inside.

Originally posted by MR-2RaCeR
I just paint the outside, you dont need to spray the inside.

i usually spray both, if im gonna spray the inside i turn the car upside down, and spray the inside, tehn about 10 minutes later i do the first coat on the outisde.

I normally airbrush the inside flat black, unless the interior color is the same as the exterior.

With each model I normally spray the outside , then I brush-paint the inside, the right colour

It maybe not a thing that can easily be seen, but it's nice to know it 's also made well, and painted in the right colour.

Olivier :smile:

I paint the inside of my models flat black or dark grey with a big brush, because there can not shine through any light.

I spray the interior the appropriate color and tape off the windows from the inside and spray the outside. If you are doing a dark interior and light exterior its a good idea to get a good coat of white primer down inside the body then do the black, this helps to keep the black from showing through the other side and causing ht eoutside color to be darker

I usually only spray the outside, the inside doesn't really need to be colored

I always spray both sides the body colour then detail the headliner and 'c' pillar the appropriate interior colour.

Originally posted by Verminator
I always spray both sides the body colour then detail the headliner and 'c' pillar the appropriate interior colour.

Bingo!:tongue:

Originally posted by Verminator
I always spray both sides the body colour then detail the headliner and 'c' pillar the appropriate interior colour.

Ohh, I do the same thing. I thought he was asking if we paint the inside panels (Like on the inside of the boot and stuff) :bloated:

i spray the outside any inside a ittle bit, just to make sure every part of the pillars are covered . sometimes i might just paint to inside flat black though.

First I prime inside and outside, then paint the inside flat black, then spray the outside whatever color. Then i do the window trimming (pain in the arss)