gsr swap need help

so here i am wit a new motor sittin on my garage floor for about a month now and still not knowing excatly what i need to do the swap if someone has a full list in what needs to be done or if anyone has done it or can refer me to a website any info will help...my email is [email protected]

That's a bit vague... I take it you've never done a swap before and ordered a new engine thinking it would bolt right up? I admire your bravery, but get somebody with some experience to do it, pay them, and take notes.

If you still insist on doing it yourself, post what the engine came/didn't come with i.e. wiring harnes, ECU, tranny, O2 sensors, etc. and I'm sure I can, or somebody on this site can help you out.

Well i see that you have a 91 integra. Its a str8 drop it but only one problem. You have a cable tranny and so you ordered a gsr with a hydro trans. you have to get that converted or u can find a b16 cable trans. The wiring part you have to get the obd1 conversion.

i didnt mean that i didnt know how to do the swap what i need is a list of things i would need to replace i already have a trans coming from jersey i have the pw0 ecu i have stock axles is there nething else has anyone ever done the swap. and when i got the motor i knew exactly that it wasnt gonna fit rite in...

Originally posted by 9teg1
i have the pw0 ecu


Well that ecu is a Non obd and your gonna use it for a obd1 motor. So you will need a obd0 to obd1 jumper harness. Unless you get a p28 ecu chipped or a gsr ecu from obd1.

no since i have already obd1 harness it all fits correctly got the pw0 ecu so i can have vtec